Operation Manual

FRONT PANEL & REAR PANEL
V1.0 9
2. Select the channel that you want to lock and then press OK. will be marked at the
end of the selected channel name bar. To delete press OK again.
3. Press EXIT to go to Main Page or press MENU to go to the current live channel.
1-5. DELETE
1. Use green button to go to the Delete mode.
2. Select the channel that you want to Delete and then press OK. will be marked on
the selected channel number.
To delete press OK button again.
3. Press EXIT to return to the previous menu or press MENU to go to the current live
channel.
2. INSTALLATION
This section may help you to set up antenna and
scan satellite or transponder, etc. Select Installations in Main Page using °„°Â and
press OK.
Press EXIT to return to the previous menu or press
MENU to go to the current live channel.
2-1. Antenna Connection
2-2. Satellite List
2-3. Antenna Setup
2-4. Single Satellite Search
2-5. Multi Satellite Search
2-6. TP List
2-1. Antenna Connection.
1. You can select between Fixed antenna and motorized Antenna.
2-2. Satellite List
1. You can select between pre-programmed satellites. You can also edit, add and
delete satellite
2. You can mark the satellite with OK button.
2-3 Antenna Setup
1. You can select the antenna mode, between USALS and DiSEqC 1.2 after we
select motorized antenna in antenna connection or select a Fixed dish and LNB type.
2-4 Single Satellite Search
1. you can mark satellite to search channels in that marked satellite.
2-5 Multi Satellite Search
1. We can mark satellites to search channels in the sequence of chosen satellites.
2-6 TP List
1. With the buttons ◀ ▶ we can select the satellites in which we want to see the pre-programmed
TP list. We can edit, add, delete and even search for new transponders in this menu.