SAFETY PRECAUTION CAUTION: The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to "dangerous voltage" and to prevent from a risk of electric shock. Warning: To reduce the risk of electric shock, don't open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing).
Attachments: Never add any attachments and/or equipment without the manufacturer consent; as such additions may result in the risk of fire, electric shock or other personal injury. Locating: Slots and openings in the cabinet are provided for ventilation to protect it from overheating. Do not block these openings or allow them to be blocked by placing the STB on a bed, sofa or other similar surface, nor should it be placed over a radiator or heat register.
Contents Contents 1. Remote Control & Panel Description ............................................................... 3 1.1 Front Panel Description ...................................................................................3 1.2 Rear Panel Description ....................................................................................4 1.3 Remote Control Description .............................................................................5 2. Basic Operations..................................
Contents 3.1.4 Lock..................................................................................................... 17 3.1.5 Find ..................................................................................................... 19 3.2 Radio Channel List ........................................................................................ 19 3.3 Channel Setup .................................................. ¡Error! Marcador no definido. 3.4 Favorite group list name .............................
Remote Control & Panel Description 1. Remote Control & Panel Description 1.1 Front Panel Description 1 LED POWER 2 POWER 3 4 LED LOCK VOL+/- 5 6 MENU OK 7 CH+/- 8 Remote Sensor Mode indicator (LED) – red light in operating and standby mode. Is used to switch between the working mode and the standby mode. Blue light when receiving a channel signal. To change volume to move cursor, change numbers in the menu or to change the choice To enter into the main menu and exit all menus.
Remote Control & Panel Description 1.2 Rear Panel Description 1 2 3 4 5 6 7 8 9 10 11 ANTENNA IN LOOP OUT TV SCART USB HDMI OPTICAL S/PDIF VIDEO AUDIO Y Pb Pr AC IN POWER ON/OFF Terr. input of the digital tuner. Terr. output for cascading to others devices. Output SCART for the connection to a TV set. To connect with USB disk. HDMI output for the connection to a TV set. Optical output for digital audio (AC3) CVBS video output for TV AV in. HiFi output for stereo set. Component Out Mains input cable.
Remote Control & Panel Description 1.
Basic Operations 2. Basic Operations 2.1 Switch on STB Switch the [Device’s Main Power] switch on. When the STB is first used it will display “Quick Setup” window. you will set Language, First Audio, Second Audio, LNB Power, Antenna Setup and Multi Search. ? Frequently Asked Question Q: The power of my STB is on and it is running in TV mode but the TV screen shows nothing: A: Make sure the TV set has been set to the correct video input(not the TV channels).
Basic Operations 2.3 Mute 1. 2. Press the [Mute] button to mute the sound. On the screen an icon will be displayed to indicate the muted sound. Press the [Mute] button again to restore the sound. 2.4 Audio 1. 2. In TV mode, press the [Audio] button to open the Audio Mode window. Select the item you want to adjust with [CH▲/▼] and change the value with [VOL◄/►]. 2.5 TV/STB Switch TV output from STB to VCR Scart. 2.6 TV/Radio In TV mode, press [TV/Radio] to switch to Radio mode.
Basic Operations 2.9 TXT 1. 2. Press [TXT] button in TV mode to open the teletext page. This service is depending on the support of the channel provider. If the channel does not support teletext information, it will show “No Teletext Data” on the screen. 2.10 P/N In TV mode, press [P/N] button to display Mode is used to switch the display mode. 2.11 RECALL Pressing the [Recall] button allows you to toggle between the actual and the last selected channel. 2.
Basic Operations 2.15 FAV +/1. 2. In full screen, press [FAV +/-] keys can switch the favorite channels in current satellite channels list directly. The sequence of the switch favorite channels is following the sequence that in the current satellite channel list, not follow the sequence in the favorite group. 2.16 EPG The STB supports Electronic Program Guides (EPG) to give you information about the actual programs of certain channels like event name, subtitle, description, start and finish time.
Basic Operations 2.17 FAV 1. In TV mode press the [FAV] button to display the Favorite Group window on the screen as the picture beside shows. 2. In the Favorite Group window you can select the desired favorite channel with [CH▲/▼] and confirm it with [OK] to switch to it. In bigger groups you can navigate with [PGUP/ PGDN]. 3. With [VOL◄/►]. You can select different Favorite Groups. 4. Press [Exit] to close the Favorite Group window.
Basic Operations 5. 6. 7. Press [FAV] button to open FAV list. After selecting a Favorite Group the channel list will be reduced to the channels of this group. Press [Blue] button to open the Find window. You can use this feature to find channel by their names. Press [OK] to change and display the marked channel. 2.21 MENU Press [Menu] button to enter or exit the current menu. 2.22 EXIT Press [Exit] button to exit the current menu. 2.23 PAUSE 1. 2.
Basic Operations 2.25 EDIT In TV mode, press [EDIT] button to access directly to the “TV Channel List” menu or to the “Radio Channel List” menu. 2.26 INFO In TV mode, press [INFO] button can open information screen, in the window shows the parameters of current channel. Two dynamic bars at the bottom of the window reflect the signal intensity and signal quality of the current channel. 2.27 USB In TV mode, press [USB] button to access directly to the “Media Management” menu. 2.
Basic Operations 2.31 REC button In recorded mode, during your watching, press REC button to set up a starting point 2.32 T.S. In TV mode, press [T.S.] button you will be asked to “Start time shift?” menu. 2.33 GOTO When you play the recorded channels, press [Goto] button, the “Jump to” message box will pop up, input the Time and press [OK], then the receiver will back to the input time point and play the program from that point continually.
Basic Operations ● 2.35 In TV mode, press [ ] button you will be asked to “Do you want to record?” menu. ● 2.36 ◄◄/►► When you play a recorded channel, press [◄◄] button to back the program fast and Press [►►] to fast forward the program. Selection: 2x, 4x, 8x speed . 2.37 ►II When you play a current or recorded program, press [►II] will stop the program, press [►II] again will play the program continually, And Timeshift is started by this key. 2.
Menu Operations 3. Channel Manager Press [Menu] in the TV/radio mode to enter the main menu. 1. Press [CH▲/▼] to select the channel item. 2. Press [OK] to enter the selected item. In the channel menu: Press [CH▲/▼] to select the wanted menu item among TV Channel List, Radio Channel List, Channel setup, Favorite group list name and Delete All. Press [OK] to enter the selected item. 3.1 TV List If you enter the channel list menu a window like the one below will open. 1.
Menu Operations 3.1.1 Favorite 1. Press [FAV] to open the favorite window. 2. You can select between 32 favorite groups with [CH▲/▼]. Press [OK] to assign the channel to a favorite group, press [EXIT] to exit favorite group. 3. Press [OK] again to remove the channel from the marked favorite group. 4. Press [MENU] button you will be asked “Are you sure to save?”. Select “Yes” to save the marked favorite group. Select “No” to cancel the operation. 5. To return to the TV channel list.
Menu Operations 3.1.3 Sort Press [Green] to open the sort window. Press [CH▲/▼] to select and [OK] to confirm your choice. The ways of sorting are: ♦ Default: Sort channel factory default. ♦ FTA/CAS: Sort channel by free and scrambled sequence. Free channels will be listed first and scrambled channels behind in the channel list. ♦ Lock: Unlocked channels are listed first end locked channels at the end. ♦ Name(A-Z): Sorting in Alphabetical order, ignoring “$” symbol.
Menu Operations 3.1.4.2 Skip In channel edit menu, press [Green] button to place a skip icon behind the name of the highlighted channel. Marked channels will be skipped when you change channels in TV mode after you confirm to save the changes when you leave this menu. 3.1.4.3 Lock In channel edit menu, press [Yellow] button to place a lock icon behind the name of the highlighted channel.
Menu Operations 1. 2. 3. 4. Press [OK] on the “Satellite” item to display the satellite list. You can select the satellite for which you want to create a new channel. With marked “TP Index” item press [OK] to display TP list, use [CH▲/▼] to select for which you want to create a new channel. Press [OK] to display the TP number where the channel can be found. The next three items will show the related parameters.
Menu Operations ? Frequently Asked Question Q: IF I incautiously delete all channels, what should I do? A: there are two ways to restore: To research all channels in the “Installation” menu. Use “Factory Default” function to restore all channels in the “Tools” menu.
Menu Operations 4. Installation When you enter to “Installation” menu, there will display the screen like right: In “Installation” menu; 1. Press [▼/▲] key to select menu pages among Auto Scan, Channel Scan, Channel Setup and Aerial Adjustment. 2. Press [▼/▲] key to select menu items among each items. 3. Press [OK] key to enter the selected item. 4.1 Auto Scan When you enter to “Auto Scan” menu, there will display the screen like right: 1.
Menu Operations 3. 4. When you complete your modification, move highlight to “Search” item and press [OK] key, then it will begin to scan. In the “Channel Scan” item, press [Exit] key to exit the scanning and save the current parameters. 4.3 Factory Default When you press [OK] on the “Factory Default” item: 1. A dialogue box will occur where you need to enter the password. 2. After you input the correct password a warning message will be displayed like the one beside. 3.
Menu Operations 2. 3. 4. 5. 6. language include: English, German, French, Spanish, Italian, Portuguese, Turkish, Polish, Russian, Danish, Greek, Hungarian, Arabic, Farsi and Dutch. First Audio: Some channels offer more than one audio language. This function allows you to set the preferred audio language for those channels. If a channel offers the same audio language as the “First Audio” you set the system will play this audio language as default.
Menu Operations 2. 3. 4. 5. 6. 7. if this function is “Standard” or “Teletext Subtitle”. If this function is “Off” subtitles won’t be displayed. OSD Timeout: This setting determines the duration the info window is displayed on the screen when you change channels. Press [Vol◄/►] to set the time between 1 to 10 seconds. Position: Press [Vol◄/►] select the position between top and bottom. OSD Transparency: With this parameter you can set the transparency of the menus.
Menu Operations 1. 2. Local Time Setting: When you select “Local Time Setting” and press [OK] then you will see a window like the one beside: ♦ GMT Usage: This item is used to set the time by using the time signal from the satellite. Press [Vol◄/►] to change the setting. ♦ The “GMT Offset” item is only available when “GMT Usage” is set to “On”. Press [Vol◄/►] to set the “GMT Offset” value. With every time you press the button the time offset will be increased/decreased by half an hour.
Menu Operations 5.3 Parental Lock You can set a password for anyone who wishes to operate the “Installation” menu. You can also set the password to lock channels. Below you find how to set and change the password. 1. On “Parental Lock” press [OK] to open a dialogue box and input the password.
Menu Operations 2. 3. 4. 5. 6. Menu Lock: If Menu Lock is set to “Yes” then you need to enter the password every time you want to open the menu. If set to “No” then you can open the menu without entering the password first. Channel Lock: If set to “Yes” then you need to enter the password before you can see those channels which have been marked as locked channels in the channel menu. If set to “No” then even those channels can be selected without entering the password first.
Menu Operations 6. Utility When you enter to “Tools” menu, you will see a screen like beside: In “Tools” menu: 1. Press [CH▲/▼] to select the wanted item among Information, Quick Setup, Factory Default, Software Upgrade, SatcoDX Auto Programming and CAS. 2. Press [OK] to enter the selected item. 6.1 Information 1. 2. When you select the “Information” menu you will see a screen like beside. The screen displays data about the current channel. Press [Exit] button to leave the information display. 6.
Menu Operations be placed at the root path of your USB device. 1. Upgrade Mode: the mode of the upgrade to be choosed, Press [Vol◄/►] to select Software, Whole, User Interface, Default DB, CAS and Ch.List & Setting. In the “Software” item press [Vol◄/►] to select the file which you want to scan or press [OK] to open the “USB list” to select directly with [CH▲/▼], and press [OK] to finish the selection. 3. Start: Press [OK] to start upgrade. 4.
Menu Operations 7. PVR When you enter to “PVR” menu, you will see a screen like beside: In “PVR” menu: 1. Press [CH▲/▼] to select the Media List, Media Control and Disk Information. 2. Press [OK] to enter the selected item. 7.1 Timer When you enter “Time & Timer Setting” a menu with this 3 items will be opened. 3. Timer: Select “Timer” item and press [OK] to enter the “Timer” menu. You can press [CH▲/▼] to select item. ♦ The current time will be displayed in the first column.
Menu Operations Wakeup Channel: Press [OK] to enter the channel list, and select the channel you want to see with [CH▲/▼], press [OK] to confirm it. Wakeup Date: Use number buttons to input your wakeup date. On Time: Use number buttons to input your wakeup time. If date and time are reached then no matter if the system is in standby mode or in playing mode, it will automatically switch to the channel you set and start to play.
Menu Operations 7.2 USB Press [CH▲/▼] to select the wanted item partition. Press [Red] button to open the “Rename” window like showed beside. Press [CH▲/▼] / [Vol◄/►] to select the leading character of the channel name and press [OK] to confirm it. If you enter the USB menu a window like the one below will open. 1. Press [Vol◄/►] select the all, mp3, image, video, music list, picture list, video list, Record list. 2.
Menu Operations 7.2.1 All [Edit] Press [Red] button to open the “Edit” window like showed beside. The color buttons offer further functions to manage. 1. ♦ Rename Press [Red] button to open the “Rename” window like showed beside. Press [CH▲/▼] / [Vol◄/►] to select the leading character of the channel name and press [OK] to confirm it. ♦ After entering the character(s) highlight “OK” in the window and press [OK] on the RCU.
Menu Operations 3. ♦ ♦ 4. ♦ ♦ ♦ b) Press [MENU] button you will be asked “Are you sure to save?”. Select “OK” to delete all “mp3 / image / video”. Select “Cancel” to cancel the operation. Move Press [Yellow] button to show a moving icon behind the “mp3 / image / video / folder” name. Move the “mp3 / image / video / folder” to the desired folder list with [CH▲/▼]. Press [OK] to confirm the position. Folder Press [Blue] button to open the “New Folder” window like showed beside.
Menu Operations [Find] Press [Blue] button to open the “Find” window like showed beside. Press [CH▲/▼] / [Vol◄/►] to select the leading character of the channel name and press [OK] to confirm it. After entering the character(s) highlight “OK” in the window and press [OK] on the RCU. Press [Exit] button to close the find window and brings you back to the all list. [play] The play offer further functions to manage. If you enter the play menu a window like the one below will open.
Menu Operations open another window. press [Red] to set the image as background. press [Green] to delete the image as background. 7.2.4 Video Basically the operation of “video” is same as “all”. 7.2.5 Music List The color buttons offer further functions to manage. [Delete] In media list menu press [Green] button will open another window where you can choose between add one image and add all image. ♦ Del One Press [Red] button to mark a image for add.
Menu Operations [Rename] 1. Press [Red] button to open the “Rename” window like showed beside. Press [CH▲/▼] / [Vol◄/►] to select the leading character of the channel name and press [OK] to confirm it. 2. After entering the character(s) highlight “OK” in the window and press [OK] on the RCU. 3. Press [Exit] button to close the find window and brings you back to the Record list.
Menu Operations [Lock] In channel Record menu, press [Green] button to place a lock icon behind the name of the highlighted Record. Marked Records will be locked and displayed only after password has been entered if you confirm to save the changes when you leave this menu. [Delete] In channel Record menu, press [Red] button will open another window where you can choose between add one image and add all image. ♦ Del One Press [Red] button to mark a image for add.
Menu Operations 7.3 PVR Options 1. Reserved TMS Size: Press [Vol◄/►] 2. 3. 4. 5. to switch between “0 MB / 200 MB and 500 MB”. Select “MENU / EXIT”, press [MENU / EXIT] to reset to make tms size valid now. Select “Cancel” press [OK] to cancel the operation. Jump Step Value: Press [Vol◄/►] to switch between “1 mins / 3 Mins / 5 Mins / 10 Mins / 15 Mins”. The value control the step of I◄◄/►►I operation. Record Type: Press [Vol◄/►] to switch between “TS and PS”.
Technical Specification 8.
Technical Specification MISCELLANEOUS Supply voltage Power consumption Operation temperature Storage temperature Dimension (W * D * H) Weight 100~240VAC~50~60Hz Max 20 watts +5° to +40° -20° to +70° 310*260*65 mm 1.
