Operation Manual

MENU GUIDE
14
II-2. DiSEqC Switch
1. Select Channel Search in Installation using ▲▼
and press OK.
a) If you select DiSEqC Switch and press OK on the menu
will be, DiSEqC Switch Page will be displayed.
b) Select the proper Satellite of each DiSEqC port (A~D)
using ◀▶and ▲▼ and press SEARCH. Selected
Satellites will be searched automatically.
II-3 Motor Setup
1. You can move the cursor using ▲▼ and press OK
when you select the value that you want.
a) Motor Type : DiSEqC 1.2, USAL
- Press OK to display Motor Type
- Select the proper Motor Type and then press OK.
b) Satellite
- Press OK to Display the Satellite List Box
- Select the proper Satellite and then press OK.
c) Switch & LNB
- Press OK to Display the LNB frequency list or Switch
Setting
- Select proper LNB & proper Switch.
d) Frequency
- Press OK to Display the Frequency List.
- Select the proper Frequency and then press OK.
e) Motor Movement
- Search the appropriate position of the selected Satellite
using◀▶.
II. Installation (Satellite)
15
MENU GUIDE
II. Installation (Satellite)
e) Motor Control
Select the position using
◀▶and then press OK.
Message box displays on the screen.
- Store Sat position : Stores the current position of the motor
for the selected satellite.
- Goto Sat Position : Moves the motor to the stored position
of the selected satellite.
- Goto 0 : Goes to the center of the motor.
- Reset Position : Resets all stored position of the motor.
f) Satellite Position
- Input directly the position using NUMBER KEY on the RCUl.
- Select the direction using ◀▶(WEST / EAST).
h) Search
- Press Search to start scan channels.
- Press OK to start scanning.
g) Search Option
- Press OK to display the Search Option list.
- Select the Search Option that you want and then press OK.
II-4. Factory Default
Use Factory Default function only when you want
to return the receiver to the condition of factory
default. All settings and channels will be deleted.
1. Select Factory Default in Installations using ▲▼ and
press OK.
2. Message box displays on the screen.
3. Select OK to return the receiver to the condition of factory
default and then press OK.
4. Press EXIT to return to the previous menu or press MENU
to go to the current live channel.
2. Edit my local position
- Press Green Button to edit local Position.
b) Latitude
- Input directly the Latitude using UNMBER
KEY on the RCU.
- Select the direction using
◀▶
(NORTH/SOUTHd).
※ TP EDIT : To Edit TP Press the RED
button on the RCU.
a) Longitude
- Input directly the Longitude using NUMBER KEY on the RCU.
- Select the direction using
◀▶(WEST / EAST).
3. Press EXIT to return to the previous menu or press MENU to go to the current live channel.