User guide

16
Initial Setup
Hard Drive (HDD) Installation
Remove FOUR screws from the top cover
Remove 2 screws from the HDD Cradle, as shown
Seat the HDD inside the cradle and plug SATA cables
Insert the 2 screws on HDD cradle, as shown
Re-assemble the top cover and re-insert four screws
Once the HDD is physically installed. Format
the HDD using Mvix Ultio Pro (in-built) utility
Caution: Do not install a HDD containing
data/files. Ultio Pro will format the HDD upon
first use and erase all current data.