User guide

Initial Setup

If choosing a

Component (YPbPr) Cable:

Plug the Component YPbPr cable into the output of Mvix Ultio Pro and input of TV. Since

Component cables are for video signal only, you will need to connect another AV (Red-

White) cable connector of AV cable into the audio output of Ultio Pro and audio input of

TV or amplifier / AV receiver. Turn on your LCD or Plasma and select YPbPr video input

mode.

If choosing a

HDMI Cable

HDMI output provides the highest quality of video output. For your convenience, a HDMI

cable is included with Ultio Pro. HDMI output offers the composite of digital audio and

video signal upto 1080p resoution. Connect the HDMI cable to output of Ultio Pro and

the display device (TV, LCD, projector etc.) with HDMI input. Select HDMI mode in TV.

Always connect the HDMI cable before usage. Once connected, adjust your TV mode to

HDMI and requisite resolution (720p, 1080i or 1080p), depending on your viewing

preferences.