User guide

29
Initial Setup
Connect to a PC via USB 2.0
This HDD-based Media Player can also be used as a external USB storage device.
After you have successfully installed an internal HDD inside Ultio Pro, connect to the power supply to
Mvix Ultio Pro. (Your PC will not recognize the Ultio Pro if power supply is not connected)
Connect the Mvix Ultio Pro to your PC using a USB2.0 cable.
Once the PC has recognized this external storage device, simply drag and drop (transfer) files and
folders from your PC to Mvix Ultio Pro’s internal HDD.
Upon completion of data transfer, remove the USB cable from the PC by disconnecting the storage
device safely (click the USB device icon, lower right bottom corner on your PC, to stop the USB
device)
Note: If your PC does not recognize Mvix Ultio Pro as an external storage device, disconnect the USB cable,
reboot the PC, and then connect again.
Caution: Do NOT disconnect power when connected to the PC.