Users Manual

Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this manual for future
references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
4. Always completely disconnect the power before working on the system’s hardware.
5. No connections should be made when the system is powered as a sudden rush of power may damage
sensitive electronic components.
6. Always disconnect this device from any power source before cleaning.
7. While cleaning, use a damp cloth instead of liquid or spray detergents.
8. Place the device on a solid surface during installation to prevent falls
9. Do not cover the openings on the device to ensure optimal heat dissipation.
10. Watch out for high temperatures when the system is running.
11. Do not touch the heat sink or heat spreader when the system is running
12. Never pour any liquid into the openings. This could cause fire or electric shock.
13. As most electronic components are sensitive to static electrical charge, be sure to ground yourself to
prevent static charge when installing the internal components. Use a grounding wrist strap and contain all
electronic components in any static-shielded containers.
14. If any of the following situations arises, please the contact our service personnel:
i. Liquid intrusion to the device
ii. Device is not working as expected or in a manner as described in this manual
iii. Any obvious signs of damage displayed on the device
15. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4°F) OR ABOVE 60°C (140°F) TO PREVENT DAMAGE.