MX SELECT OWNER’S MANUAL Revolutionising Strength Training REGISTER YOUR PRODUCT AT WWW.MXSELECT.
MX SELECT WELCOME TO THE MX SELECT FAMILY Congratulations on your purchase of the MX80 adjustable barbell and EZ curl rack system. From deadlifts, presses, cleans and jerks the MX80 variable weight system combines a range of fixed bar options in one compact, heavy duty weight lifting package. Replacing 26 fixed weight bars or 1140 lbs (517 kg), this industry-first adjustable barbell and EZ curl rack is designed for compact spaces and allows for seamless weight transition between reps.
TABLE OF CONTENTS Important Safety Instructions..............................................................................................................4 Product Specifications...........................................................................................................................5 Product Registration & Serial Number...............................................................................................6 Unpacking Your MX80......................................................
IMPORTANT SAFETY INSTRUCTIONS All users should read the operating instructions contained within this manual and understand how to handle the MX80 system before use. NOTE THE FOLLOWING SAFETY PRECAUTIONS: 1. CAUTION: As with all fitness programs it is advisable to consult a physician before is heavy and can cause severe injury if undertaking exercise of a strenuous nature. dropped. If you experience any pain or dizziness while exercising, stop immediately and consult your physician. 11.
PRODUCT SPECIFICATIONS System Footprint in Stand: 56.3” L X 18.5” W X 30.9”H (143 cm L X 47 cm W X 78.5 cm H) Assembled Unit Weight with Stand: 135.3 lbs (61.5 kg) Shipping Package Weight with Stand: 146.3 lbs (66.
PRODUCT REGISTRATION & SERIAL NUMBER PRODUCT REGISTRATION TO VALIDATE WARRANTY SUPPORT, RECORD YOUR UNIQUE PRODUCT PURCHASE BELOW AND SAVE YOUR ORIGINAL RECEIPT. SERIAL NO. (Located underside of cradle). DATE OF PURCHASE. TO REGISTER YOUR PRODUCT WARRANTY VISIT WWW.MXSELECT.COM/SUPPORT If you require product support please contact your local MX Select Distributor in the first instance.
SYSTEM ASSEMBLY STEP 1 REMOVE COMPONENTS FROM PACKAGING STEP 2 ASSEMBLE THE RACK 1. Carefully lift the weight plates from Box 1 and remove from cradles. 1. Lay the stand legs on the floor and place the stand base in position on top of them. This makes it much easier to get the bolts in. NOTE: 2. Remove the fixed bars from Box 2 and set to the side. Ensure the MX80 logo decal is facing outwards. 3. Remove all remaining parts from Box 2. 2.
SYSTEM ASSEMBLY STEP 3 FASTEN THE CRADLES TO THE RACK 1. Assemble [2] cradles to baseplate with (4) M5 x 10 bolts and (4) M5 x 10 washers on each cradle, DO NOT fully tighten at this time. NOTE: Ensure high side of each cradle is facing the back of the stand. 2 1 4 3 8 ITEM NO.
SYSTEM ASSEMBLY STEP 4 LOAD YOUR SYSTEM 1. Position your stand in its desired location. 2. Place (12) weight plates in each cradle. 3. Carefully place barbell handle into rack to load. Be careful to ensure each end is aligned with weight stack. NOTE: The release button should be oriented to the user. 4. If necessary, slide one cradle with weight plates side to side to allow for a proper fit. STEP 5 TEST WEIGHT PLATE SELECTION MECHANISM 1. Adjust the weight selector dials to your desired weight.
OPERATING INSTRUCTIONS Prior to undertaking any lifting program, ensure you have followed the set up instructions on page 7 and are familiar with correct operation as detailed below: 1. Each handset has a weight range of 20-80lbs, 5. Carefully lift the barbell out of the cradle, being in 5lbs increments (see table below). Our mindful that it is lifted in a vertical movement.
MAINTENANCE & TROUBLESHOOTING GUIDE For full product support, manuals and warranty requests visit: www.MXSelect.com/support PROBLEM SOLUTION When the barbell is lifted out of its cradle an extra weight plate lifts out and becomes dislodged from the remaining weight plate stack. TIP: Be sure to lift the barbell vertically when removing it from the cradle. If the barbell is pulled out at an angle, it may drag against un-selected weight plates. The cradle end plate is too tight.
MX SELECT Revolutionising Strength Training COPYRIGHT MX SELECTABLE WEIGHT SYSTEMS U.S. PATENT NO. 9643042 www.MXSelect.
