manual

www.mxlmics.com
Great for
DSLR
Cameras
Although it’s commonly used in front of a stage to pickup concerts or theater events,
the FR-400M boundary mic has a wide cardioid pattern and can be used in other
applications like under the lid of a piano. The switch located on the bottom of the mic
can be used to boost or cut low frequencies by 6 dB in order to balance the frequency
response.





FR400M
Boundary Microphone
14 15



6 in / 152.4 mm
Included Accessories
Windscreen Hot Shoe
Microphone Mount





14.5 in / 368 mm
Omni*Cardioid*
* Windscreens included







The MXL FR-402 is a multi-purpose boundary mic with a wide pattern and low profile. You
can use this mic on a number of different sources in almost any location. It’s also right at home
on a conference table, recording interviews, connected to a video camera for field recording or
capturing audio from a concert or play.



FR402
Boundary Microphone
FIELD RECORDING FIELD RECORDING
The MXL FR-401M boundary mic is designed to pickup multiple sources from a distance
while avoiding unwanted sounds from behind the mic. Some common applications include
recording interviews, live concerts, studio recording sessions, or plugging directly into a video
camera to make sure you get all the audio on set.
FR401M
Boundary Microphone
Included Accessories
Aluminum Flight Case





Included Accessories
Windscreen Hard Mount
Mic Stand Adapter
Hot Shoe
Microphone Mount
FR355K
Lavalier Interview Kit
FR303
6” Shotgun Microphone
When the subject is farther than a built-in camera mic will effectively
record, you’ll need a good shotgun mic like the FR-303. Measuring 6
inches in length, the FR-303 offers clear, high quality recordings and is
perfect for videographers who want a shorter mic mounted on camera.
FR304
14.5” Shotgun Microphone
The MXL FR-304 Shotgun Microphone is a great choice for the consumer, semi-pro or professional videographer on-the-go. The FR-304 includes
a FET preamp and can be used in a variety of situations either under its own power or via a camera. It is powered with a standard AA battery with
160+ hour life.
The MXL FR-310 video mic delivers sound that’s as focused as the video. Mount it onto your
camcorder or DSLR camera, and you’ll cut to tighter, cleaner sound recordings. The FR-310
shuts out sound from the sides and back, with a pickup pattern that targets sound in front of the
camera. Three gain settings pull in the right amount of sound in close-up or long shot situations,
while a bass roll-off switch leaves low-frequency noise on the cutting-room floor. The integrated
windscreen helps block wind noise, which aids in keeping your sound in the picture.
FR310
Hot Shoe Shotgun Microphone
The microphones in the MXL FR-355K kit were designed with high
quality FET pre-amps to ensure outstanding audio quality even
under the most demanding conditions. The FR-355K kit contains
two different microphones that require 48V phantom power to
operate. They are both supplied with foam windscreens and clips.
Transducer: Electret Condenser
Polar Pattern: Supercardioid
Frequency Response: 40Hz - 20kHz
Output Impedance: 250 Ohm
Power Requirements: 1.5V AAA Battery
Low Frequency Roll-Off:
-6 dB/octave @150Hz
Output Connector: 1/8”/3.5mm Mini TRS
Gain: -5 dB, 0 dB, +5 dB
Output Signal: Mono
Battery Life: +500 hours
Dimensions: 5.3” x 2.5”/35mm x 63mm
Weight: 0.30 lbs/136g