manual

Congratulations on your purchase of the MXL® Studio 1 USB microphone.
MXL® microphones are the result of world-class engineering and manufactur-
ing capabilities. They are designed to provide you with outstanding performance
and exceptional value. While we encourage you to review this entire manual,
there are a few key points about handling this microphone that we want you to
familiarize yourself with right from the start.
The MXL® USB mics are a professional quality, cardioid condenser studio
microphone designed specifi cally for recording. Unlike microphones designed
for live performance or lesser dynamic model microphones, this instrument
requires careful handling. Hence, you should observe the following…
ALWAYS… handle the microphone carefully, avoiding sudden shocks such as
dropping or bumping the microphone into other objects.
ALWAYS… maintain a distance of approximately 4 – 6 inches when speaking
or singing into the microphone. You are encouraged to use a pop
fi lter for added protection of the sensitive capsule and to shield
the instrument from saliva and sudden bursts of air.
NEVER… tap the microphone to check if it’s working. The RED LED
behind the microphone’s protective grill will tell you it’s on and
that the correct side is facing you.
NEVER… blow into the microphone to check if it’s working. The RED LED
behind the microphone’s protective grill will tell you it’s on and
that the correct side is facing you.
By following these few basic handling procedures, you can expect a long and
trouble-free relationship with your new microphone. Again, thank you for your
purchase of this outstanding MXL® microphone.
A Little Background Information
MXL® condenser microphones use what is known as a cardioid pickup pattern,
which is more sensitive to sound waves arriving at the front of the microphone
as opposed to those arriving from the sides or rear. Unlike other MXL® models,
this microphone benefi ts from being a USB (Universal Serial Bus) device—
meaning this is a plug and play microphone that will interface with Windows
and Macintosh computers without the need for any special drivers. As a USB
device, it carries the added benefi t of not requiring an external microphone
preamp, as is the case with most condenser microphones.
We’ve already mentioned the importance of proper handling, but should you
fi nd yourself recording an outdoor performance, you would be well advised to
use a windscreen as protection for your microphone.
2 11
3. Click on the Output tab then select the device named USB Audio CODEC.
You can adjust the headphone volume by moving the fader labeled Output
volume.
4. Next click on the Input tab and select the device named USB Audio
CODEC. You can adjust the microphone volume by moving the Input Volume
fader. The gain of the microphone is very sensitive. For most applications the
fader will be set more towards the left.
Your computer is now setup to use the MXL® Studio 1 USB microphone with
most recording applications. Some applications will require additional settings
to be changed within the program. Please see your recording software’s manual
for proper setup.
For More Information
For additional information about your MXL® USB microphone, how to contact
technical support, as well as information on other products manufactured by
MXL®, please visit us online at www.mxl-usb.com.
www.mxl-usb.com