External Controls 5 1 4 6 2 3 1 WHITE LED indicates good input power connection 2 Four 9V DC outputs 3 One switchable 9V/18V DC output 4 9V/18V switch sets voltage output level of 9V/18V output (indicated by green LED) 5 INPUT jack 18V @ 2000mA power 6 GREEN LEDs indicate good output power connection M239 | Mini Iso-Brick 2
Basic Operation Operation Power Connect included AC adapter into M239’s 18V INPUT jack. The Mini Iso-Brick Power Supply requires an 18V regulated power supply rated at 2000 mA, with 5.5mm x 2.1mm positive barrel, negative center plug. The included power adapter can utilize a wide range of wall power, from 100–240V at 47–63Hz. Comes with switchable US/Japan, UK, EU, and Australian plugs. Plug AC adapter into wall outlet; white INPUT LED indicates good connection.
Basic Operation Connection Notes Troubleshooting Included cables use industry standard 5.5mm x 2.1mm positive barrel, negative center polarity plugs. The power LED fails to light. Each output features a green LED. When lit, this LED indicates a good connection. If short-circuited or overloaded, this LED will turn off. M239’s four 9V outputs can handle up to 300mA each. Dead AC outlet. Try plugging into another outlet, or test the outlet with another device like a lamp. Faulty connection.
Specifications Input 18V At 2 Amps regulated supply (positive barrel negative center 5.5mm x 2.1mm plug) Outputs 9-18V @ 800mA (switched) (4) 9V @ 300 mA (all positive barrel negative center 5.5mm x 2.1mm) *Note: Using a split cable allows you to share one output with two devices. Remember the straight plug is the end that goes into the Mini Brick DC output and the two 90° to the effects (this helps minimize ground return current noise). position.
