M282 Dyna Comp Bass Compressor ® The Dyna Comp Bass Compressor delivers the most iconic compression sound in music history, tweaked and tuned just for bass players. jimdunlop.
External Controls 3 2 4 1 5 6 1 OUTPUT knob adjusts volume of compressed signal 2 CLEAN knob adjusts wet/dry signal mix added to the compressor’s output 3 SENSITIVITY knob adjusts sustain time 4 ATTACK switch toggles between slow & fast attack times 5 TONE knob cuts/boosts midrange at 1kHz 6 FOOTSWITCH toggles effect on/bypass (blue LED indicates on) M282 | Dyna Comp© Bass Compressor 2
Basic Operation Power The Dyna Comp® Bass Compressor is powered by the Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies. This pedal cannot be powered by a battery. Directions 1 R un a cable from your guitar to the M282’s INPUT jack and run another cable from the M282’s OUTPUT jack to your amplifier. 2 S tart with all knobs set to 12 o’clock. 3 T urn the effect on by depressing the footswitch.
Specifications Input Impedance 600 kΩ Output Impedance 25 kΩ Max Input Level -5 dBV Max Output Level +2 dBV Max Compression 36 dB THD* 0.
