User Manual

Carbon Copy

Mini Analog Delay

This pedal packs the organic analog warmth and

ease of use of the original Carbon Copy Analog

Delay into an MXR mini housing with added sonic

versatility so that you can make the most out of

your pedalboard real estate.

M299

jimdunlop.com/m299

PAGE 1
M299 Carbon Copy Mini Analog Delay ® This pedal packs the organic analog warmth and ease of use of the original Carbon Copy Analog Delay into an MXR mini housing with added sonic versatility so that you can make the most out of your pedalboard real estate. jimdunlop.
PAGE 2
External Controls 3 2 4 1 5 6 1 MOD switch toggles modulation on/off (orange LED indicates on) 2 REGEN knob sets number of repeats 3 MIX knob controls blend of wet and dry signals 4 DELAY knob sets time between repeats 5 FOOTSWITCH toggles effect on/bypass (blue LED indicates on) 6 BRIGHT switch accentuates delay signal's high end frequencies (blue LED indicates on) M299 | Carbon Copy® Mini Analog Delay 2
PAGE 3
Basic Operation Power The Carbon Copy® Mini Analog Delay is powered by the Dunlop ECB003 9-volt adapter or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies. This pedal cannot be powered by a battery. Directions 1 R un a cable from your guitar to M299’s INPUT jack and another cable from M299’s OUTPUT jack to your amplifier. 2 S tart with all knobs set to 12 o’clock. 3 Turn effect on by depressing the footswitch.
PAGE 4
Specifications Input Impedance 1MΩ Output Impedance 1kΩ Max Input Level +5 dBV, 500 Hz Max Output Level +8 dBV Noise Floor** Mix at Max CW -96 dBV Mix at Max CCW -104 dBV Delay Distortion <1%, 1 kHz -5 dBV Input Delay Time 20 ms to 600 ms Noise Reduction 2:1 ratio Modulation Speed 0.2 Hz to 2.