Instruction manual

6.0 Operation
11
6.0 Operation
IMPORTANT: DO NOT ATTEMPT TO OPERATE THE CUTTER UNTIL
YOU HAVE THOROUGHLY READ AND UNDERSTAND ALL OF THE FOLLOWING
INSTRUCTIONS. CALL YOUR AUTHORIZED CHALLENGE DEALER IF YOU STILL HAVE ANY
QUESTIONS.
Figure 5 – Machine Controls
6.1 Power – Main Switch
Power is enabled when the main power switch is turned to the “ON” position (Figure 6). The display
and line light are turned on at this time.
Figure 6 –Power On-Off Switch and Circuit Breaker
Clamp Handle
On/Off Switch
And Circuit-
Breaker Switch
Backgauge
Position
Display
Right Cut
Button
Left Cut
Button
Backgauge
Hand Crank
Front
Shield