Wireless Presentation System User Manual v.1 All names and trademarks are property of their respective companies. All information is subject to change without notice.
I. OVERVIEW & FEATURES airVGATM Wireless Presentation System wirelessly enable any projector! It is plug-and-play, right out the box. Any desktop or notebook PC’s with wireless connection can access the projector without swapping any cables. It also works with HDTV’s VGA/PC port and built-in proprietary technology that allows smooth streaming of audio and video in MPEG formats. II. INSTALLATION 1.
4. Connect your computer to VW-1P wireless network (SSID: WPS). Most computers will automatically connect to the available wireless access point. Otherwise, click on your computer’s wireless utility to select WPS to connect. 5. Open your Internet Explorer and type the Server IP shown on the screen (default is http://192.168.100.10) at the address bar and you’ll see the screen below. 7. At your desktop, click on “WPS”. The program will search the network and at the prompt, enter the 4 digit log-in code. 6.
III. WPS APPLICATION SOFTWARE 1. WPS application software is built-in into the module and accessible thru Internet Explorer web browser. Its default IP address is 192.168.100.10. It can be change in WPS Admin section. 2.
3. Playing Streaming Video Click to switch to Video Streaming Mode. IV. CONFERENCE CONTROL Conference Control Administrator screen allows the host or presenter to maintain order in presentations especially when there are many users who are currently log-in at the same time. 1. Open your Internet Explorer and type the Server IP shown on the screen (default is http://192.168.100.10) at the address bar and you’ll see the screen below. Click to open the video file and submit to play it. 2.
V. WEB ADMIN Web Admin allows you to customized WPS default settings and monitor system status including setup changes for network, projection, passwords & firmware upgrade. You can also reset the VW-1P to its default settings or re-start it remotely. 3. Network configuration including changes to IP addressing, DHCP Server, Wireless and GateKeeper are under “Network Setup”. WARNING: CAREFUL WHEN MAKING ANY CHANGES.
5. “Changing Passwords” 8. “Reboot” It allow you to do soft-re-start or your network administrator the capability to remotely re-start VW-1P. When setting customized passwords, remember to keep a copy. If you forgot or loss the password, the only option is to reset to factory default. After entering the password, click on “Apply”. 6. “Reset to Factory Default” This will restore the VW-1P to factory defaults.
WALL MOUNT INSTRUCTION (OPTIONAL): TECHNICAL SPECIFICATIONS: - Screen Resolutions Video Streaming Video Formats 1024x768 (XGA) / 1280x768 (WXGA) Up to 30fps with Audio MPEG1, MPEG2, MPEG4, WMV, AVI - Network Connections Wi-Fi IEEE802.11b, IEEE802.11g Fast Ethernet IEEE802.3 10/100Mbps - Wireless Speed Wireless Frequency Wireless Channels Wireless Encryption Wireless Antenna Wireless Range LAN Protocol LAN Type IP Configuration OS Compatibility 11Mbps, 54Mbps 2.
