USER MANUAL SPDIF/TOSLINK Digtal Optical Audio Splitter 1x4
INTRODUCTION Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Our series of HDMI converters, switchers, extenders, matrixes and splitters are designed to make your A/V device use more convenient, more comfortable, more productive and more cost-efficient.
Physical Connection Showing Picture: Figure 1.0 Front Panel Showing Picture 1. POWER : power switch 2 . IR : Remote control 3 . 1,2,3,4 : input signal LED Figure 1.1 Rear Panel Showing Picture 4 . DC5V : 5V Power Adaptor Interface 5 . IR EXT : Remote control extender line input 6 . INPUT : SPDIF/TosLink input 7 .
Operating and Connecting: 1. To use the optical fiber cable to connect the optical fiber signal source (such as blue-ray player, the computer and so on) with the splitter input. 2. To let the splitters output port connected to the optical fiber signal receiver (such as amplifier, home theater and so on) by using the optical cable. 3. Connect IR extender line to IR extender line input port. 4. Connect 5V power supply to the matrix DC input port. 5.
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: Serial NO 1 Trouble Cause and Ways to deal with Description Non-PowerConnected 1 、 Check if the power adaptor head is truly and correctly inserted the power socket. 2、Check the power splitter if it is in on status. 1、Pls to make sure that the TV is on and has been connected with the machine.