User Manual

ManualsBrandsMy Cable Mart ManualsAccessories & SuppliesMyCableMart Ceiling Television Mount Bracket for 12-42inch w/Tilting to 66 lbs, Black

FIT SCREEN

BACK VIEW OF LCD TV

FIX TO WALL

This product is designed to mount LCD TV weighing up to 30kg to ceiling.

Safety Warning: Be careful to make sure there are no missing or defective parts. Never use defective parts. Improper

installation may cause damage or serious injury.

Note: The included hardware is for mounting on solid brick, concrete or hard wood batten ceiling . If mounting on

wood, do not use any concrete ancher. If you are uncertain about the nature of your ceiling, consult an expert. Please

consult your hardware or installation professional for proper mounting to other types or ceiling. The supplied hardware

is not for steel.

Forbidden Instruction: Do not mount onto plasterboard or paneled ceiling.

ASSEMBLY INSTRUCTIONS

FOR ADJUSTABLE FLAT PANEL CEILING MOUNT

(a) SOLID BRICK AND CONCRETE BLOCK MOUNTING:

(b) HARD WOOD Ceiling MOUNTING:

Use the Ceiling Plate as a template to mark 4 holes locations on the ceiling. Attach the Ceiling Plate to the

ceiling using for the 4 Lag Bolts D

Note: Do not use any concrete ancher when you mount the bracket onto hard wood ceiling.

Please check whether screws are fixed well each two months.

IF YOU HAVE ANY DOUBTS REGARDING INSTALLATION CONSULT OUR SPECIAL

FRANCHISER.

TENDING INSTRUCTION

Use the ceiling Plate as a template to mark 4 holes locations on the ceiling. Pre-Drill these holes with a

8mm masonry bit to at least 60mm in depth. Insert a Concrete Anchor E into each of these holes, Attach

the ceiling Plate to the ceiling using 4 Lag bolts D

3mm

Note: This product should be mounted to solid brick, concrete or hard wood

batten Ceiling.

8mm

HIDE CABLES

CAUTION: Do not exceed 30 kg weight limit

60mm

2a 2b 2c

ADJUST

Hold your screen tight during

installation!

1. Release the knob (-) one or

two circles

2. Tilt the screen

3.Tighten the knob(+)

How to tilt your TV?

100mm

200mm

75mm

50mm

200mm

NOTE!

Attach the LCD mount to the bracket

using the four A or B or C screws

provided.

The standard fixing plate suits VESA

50mm 75mm 100mm 200mm

and 200x100mm fixing centres.

SUPPLIED PARTS: Supplied joint parts are

exclusive for using in this product. Other joint

parts are forbidden to use on this product. If

any parts are missing or faulty, telephone the

special franchiser for a placement.

M6x60

M8x50

M6x10

A C

M5x10

M8x20

M4x10

10x50

M6x40

30x20

Summary of content (1 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS FIT SCREEN 2a This product is designed to mount LCD TV weighing up to 30kg to ceiling. Safety Warning: Be careful to make sure there are no missing or defective parts. Never use defective parts. Improper installation may cause damage or serious injury. Note: The included hardware is for mounting on solid brick, concrete or hard wood batten ceiling . If mounting on wood, do not use any concrete ancher. If you are uncertain about the nature of your ceiling, consult an expert.