Instruction manual

page 16
Replacing the seat cover and harness
Place the cover over the child car seat
and stretch the elastic over the shell,
taking care as you work the cover over
and around the plastic parts. Once in
place secure the cover on the hooks (A)
located on the back and underside of
the shell.
Stretch the two side covers (B) back
over the side panels.
The belt guides have a narrow point (1)
and a wider point (2).
Reattach the belt guides (C) ensuring
they are put on correctly as shown.
Reattach the two screws on each side.
Attention: Be careful to not over-tighten
the screws as this could cause damage.
B
A
A
C
Adjust the shell to its most reclined
position.
Pull the recline adjuster handle under
the front of the shell and whilst holding it,
pull the shell forwards to its most reclined
position.
1
1
2
2
C