User's Manual

TRUE WIRELESS STEREO EARBUDS
WHAT IS IN BOX
- Bluetooth EARBUDs
- 2-in-1 USB cable
- Small pouch
POWER ON
Press and hold the Multi-function button for about 3 seconds, hear voice prompt ”Power on”,
Blue light flash
TWE paring
1. Power on the two Bluetooth EARBUDs, and see blue lights flashing.
2. You will hear voice prompt ”Left Channel” on Left EARBUD and “ Right Channel” on Right
EARBUD, and then hear "paring" on the Master (Right EARBUD -Factory default setting).
Connect TWE to your device
Active the Bluetooth function on your device to search the“E08” and connect to it. You will hear ”
Pairing success, sort connected” from the Master EARBUD, and blue lights flashing.
It is ready for use.
NOTE:
 Factory default setting is RIGHT EARBUD as MASTER EARBUD. To reset/change
MASTER EARBUD, hold multi-function button on BOTH EARBUD for 6 seconds until
you hear "power on" and "pairing". The blue/red lights flash quickly, press
multi-function button twice on the EARBUD which you want to set as the MASTER,
and hear "searching for slave", it will come to TWE paring mode automatically.
 The TWE may be disconnected or affected a bit, if the surrounding WIFI signal is
strong.