D1260/D1260B Owner's Manual EN Keypad National Security Systems Inc (800)457-1999
D1260/D1260B | Owner's Manual This system includes a telephone line seizure feature. The system may be programmed to communicate with a central monitoring station to report system events. You will not be able to use your phone while the system is communicating with the central monitoring station. In the unlikely event that the central station is not able to receive the report, your phone may be unavailable for up to 20 minutes while the panel makes additional communication attempts.
D1260/D1260B | Owner's Manual | Contents Special Alerts (COMMAND + 7 and COMMAND + 9) 30 Using COMMAND 7:....................................................30 Using COMMAND 9:....................................................31 Part III: Advanced Commands..................................32 Advanced Commands ....................................................32 Terms Used in This Section...........................................32 BYPASS A POINT? (COMMAND + 0) ....................33 Description........
D1260/D1260B | Owner's Manual Contents User (Token) Worksheet (User 227 to 249) (101-249 = D9412G only) ..................................................................91 User (Passcode) Worksheet (Blank) ..............................92 User (Token) Worksheet (Blank)...................................93 Security System Limitations...........................................93 Fire Safety and Evacuation ............................................94 Standard Displays .......................................
D1260/D1260B | Owner's Manual | Contents Introduction Your security system helps to secure life, property, and investments against fire, theft, and bodily harm. The keypad is an advanced digital device that offers a variety of features not available with other systems. Its highly visible, backlit keypad and built-in sounder alert you to a number of system events. A familiar ATM style design and ease-of-use make it ideal for property monitoring.
D1260/D1260B | Owner's Manual | Introduction - About This Owner’s Manual The numeric keypad section is a standard 3x4-keypad matrix that should be very familiar to you. It has been designed to closely resemble that of a standard telephone with the numeric keys of 1-0; and * and # keys. The display is an easy-to-read 4 line by 20character liquid crystal display that becomes backlit when a key is pressed or a system event occurs.
D1260/D1260B | Owner's Manual | Part I: Security system basics Part I: Security system basics Using the keypad Your security system provides quick access to functions by pressing the COMMAND key and one or two additional keys. D1260 D1260B Pressing the soft key adjacent to the function being displayed initiates the function. To exit the Command Menu, press the
D1260/D1260B | Owner's Manual | Part I: Security system basics - Points Points What is a Point? A “point” is a detection device, or group of devices connected to your security system. Points display individually at the keypad with custom text. The text can describe a single door, motion sensor, smoke detector, or an area such as UPSTAIRS or GARAGE. There are two basic types of points, controlled and 24hour.
D1260/D1260B | Owner's Manual | Part I: Security system basics - View Faulted or Bypassed Points This manual uses the default idle state displays for examples of these idle states. Your security company may have programmed custom text for the idle displays in your system. The custom text and the default text for the three system idle displays follow.
D1260/D1260B | Owner's Manual | Part I: Security system basics - Warning Displays and Tones 4. The display returns to idle text after scrolling through the faulted and bypassed point information. Warning Displays and Tones Your keypad emits one of several distinct tones and displays custom text to alert you to system events. Additional bells or sirens may also be connected to your system.
D1260/D1260B | Owner's Manual | Part I: Security system basics - Fire Alarms Fire Alarms Fire alarms are the highest priority events. When a fire point activates, your keypad emits a pulsating highpitched fire tone. Evacuate all occupants and investigate for smoke or fire. Ensure that all occupants know the difference between the burglary tone and the fire tone. The tone sounds for the time set by your security company.
D1260/D1260B | Owner's Manual | Part I: Security system basics - Burglary Alarms Burglary Alarms Silencing Burglary Alarms Burglary alarms are the second priority. When a burglary point activates while your system is armed, your keypad emits a steady high-pitched burglary tone. The tone sounds for the time set by your security company. Entering a personal passcode with the proper authority level silences a burglary alarm and disarms the system if it was armed.
D1260/D1260B | Owner's Manual | Part I: Security system basics - Fire Trouble and Fire Supervisory Events Fire Trouble and Fire Supervisory Events Non-Fire Trouble and Supervisory Events When a fire trouble or fire supervisory condition occurs, your keypad emits three warble tones, then a pause (repeatedly). When a trouble event occurs, your keypad may be programmed to emit three warble tones, then a pause (repeatedly).
D1260/D1260B | Owner's Manual | Part I: Security system basics - Silencing an Alarm Entry Delay Tone and Display When you enter an armed system through a point programmed for entry delay, the keypad emits a repeating warble tone and displays the following to remind you to turn off your security system. To SILENCE an alarm: Enter your passcode and press ENTER.
D1260/D1260B | Owner's Manual | Part II: System Commands - Entering a Passcode Part II: System Commands Below is a summary of the commands covered in this section. Some of these functions may not be available in your system. Please consult your security company to determine which commands have been made available to you.
D1260/D1260B | Owner's Manual | Part II: System Commands - Turning On the System (Arming) Turning On the System (Arming) Turning Off the System (Disarming) Your security system can be turned on (armed) in many different ways, depending on the arming command used. Arming Commands are those commands used to turn on the system. The most basic arming command is to arm the entire system. The simplest way to arm your system is to enter your personal passcode or press [COMMAND] [1].
D1260/D1260B | Owner's Manual | Part II: System Commands - Turning On the System (Arming) With Doors or Windows Open Turning On the System (Arming) With Doors or Windows Open If a protected door or window is open, you may have the option of “force arming” with that point faulted. Faulted points (opened doors or windows) that are force armed are not included in the system. The remaining points arm normally.
D1260/D1260B | Owner's Manual | Part II: System Commands - Turning On the System (Arming) With Doors or Windows Open 12. Once the last faulted point is displayed, pressing the Next> soft key will start displaying a summary and then specifics of any bypassed points. 13. Once the last bypassed point is displayed, the display will change to show the soft key to either force arm the faulted points (Force Arm>) or force arm the faulted/bypassed points (Force/Bypass Arm>). 14.
D1260/D1260B | Owner's Manual | Part II: System Commands - MASTER ARM ? (COMMAND + 1) MASTER ARM ? (COMMAND + 1) 6. Description Use this function to turn on the entire system, both perimeter and interior. When you turn on the system, the display shows how many seconds of exit delay time you have to exit the protected area. You should leave before exit delay time expires. Leaving after exit delay has expired will cause the entry delay to start. You may also cause an alarm on an interior device.
D1260/D1260B | Owner's Manual | Part II: System Commands - MASTER ARM ? (COMMAND + 1) Master Arming all Areas 7. To arm a selected area, press Next> until the desired area appears (Area name text along with Arm Area # ?). 8. Then press Arm> 9. The next available area will appear with the option to arm it. If you prefer, you may use the Master Arm ?> command in the Command Menu to initiate this function which will arm all available areas according to your authority level. 1.
D1260/D1260B | Owner's Manual | Part II: System Commands - MASTER ARM INST ? (COMMAND + 1 + 1) 13. To disarm your security system, enter your personal passcode and press ENTER. 14. The display changes to show that all the areas are disarmed. Depending on what areas are armed or areas that you have authority, 12345678 may or may not appear. MASTER ARM INST ? (COMMAND + 1 + 1) Use this function to turn on a single area, both perimeter and interior without delays.
D1260/D1260B | Owner's Manual | Part II: System Commands - PERIMETR INST (COMMAND + 2) PERIMETR INST (COMMAND + 2) 4. The display shows Perimeter On Instant. Turn On the Perimeter With No Delays Description Use this function to turn on only the perimeter of your building, leaving the interior of the building disarmed. This function allows no exit or entry delay time through the perimeter, including the designated exit delay door.
D1260/D1260B | Owner's Manual | Part II: System Commands - PERIMETR DELAY ? (COMMAND + 3) After the exit delay expires, Perimeter On Delayed is displayed. PERIMETR DELAY ? (COMMAND + 3) Turn On the Perimeter With Delays Description In residential systems this function allows you to only arm the perimeter and exit through a door programmed for exit delay. The interior of the building remains disarmed. People or pets are free to move throughout the interior of the premises.
D1260/D1260B | Owner's Manual | Part II: System Commands - Silence the Trouble Sounder & Clear Trouble Display (COMMAND + 4) Silence the Trouble Sounder & Clear Trouble Display (COMMAND + 4) VIEW MEMORY ? (COMMAND + 4 + 0) Description Description Use COMMAND 4 to silence the trouble sounder during system events. This command also clears system messages from the display.
D1260/D1260B | Owner's Manual | Part II: System Commands - WALK TEST ? (COMMAND + 4 + 4) 4. Your system displays event summary lines and point text in this order: a. fire alarm summary line b. point text for each fire alarm event c. alarm summary line d. point text for each alarm event e. fire trouble summary line f. point text for each fire trouble event g. trouble summary line h. point text for each trouble event. 5. Press NEXT> to scroll through the events.
D1260/D1260B | Owner's Manual | Part II: System Commands - WALK TEST ? (COMMAND + 4 + 4) The display shows ### points untested. If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. Press the Next Pt> or Prev Pt> soft keys to see information about specific points that have not yet been tested. Press NEXT> soft key repeatedly. 6. Move through this list by pressing the Next Pt> soft key.
D1260/D1260B | Owner's Manual | Part II: System Commands - RESET SENSORS ? (COMMAND + 4 + 7) RESET SENSORS ? (COMMAND + 4 + 7) If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Reset Sensors Description Press the MENU> soft key to enter the Command Menu. Detection devices, such as smoke detectors and shock sensors, must be reset after being activated. This function momentarily removes power from these sensors to reset them.
D1260/D1260B | Owner's Manual | Part II: System Commands - WATCH MODE ? (COMMAND + 6) WATCH MODE ? (COMMAND + 6) If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Watch Mode Description Press the MENU> soft key to enter the Command Menu. With your security system disarmed, you can use watch mode to monitor some points. Each time some points are faulted (door or window is opened) the keypad chimes once and displays the point text for 60 seconds.
D1260/D1260B | Owner's Manual | Part II: System Commands - PERIMETR PART ? (COMMAND + 8) If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. In commercial systems, when you need access to the large overhead doors to receive deliveries, using this function will allow you to keep the rest of the building perimeter armed. Using Perimetr Part: 1. The display shows disarmed idle text.
D1260/D1260B | Owner's Manual | Part II: System Commands - Special Alerts (COMMAND + 7 and COMMAND + 9) 4. When exit delay time expires and the system turns on, the display shows: Special Alerts (COMMAND + 7 and COMMAND + 9) Description 5. 6. When performing a COMMAND 8 and no points are faulted or if the points return to normal before the exit delay time expires, the system is turned on as in COMMAND 3. To disarm, enter your personal passcode and press ENTER.
D1260/D1260B | Owner's Manual | Part II: System Commands - Special Alerts (COMMAND + 7 and COMMAND + 9) 3. Your COMMAND 7 special alert has been programmed to: notify your alarm company ring a bell on your premises display at your keypad 3.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - Advanced Commands Part III: Advanced Commands Use this section of the manual to perform advanced system functions like add and delete user passcodes, reassign authority levels to user passcodes and operate or change programmed scheduled events (Skeds) from the keypads. As you make changes to the system, update the information contained in the tables in this guide to provide an accurate account of the programmed information.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - BYPASS A POINT? (COMMAND + 0) times. User Passcodes A three to six digit number entered at a keypad to access the system. BYPASS A POINT? (COMMAND + 0) If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Description This command allows you to bypass points that you do not want included in the system. Points that are not included in the system do not detect intruders and cannot send any reports.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - BYPASS A POINT? (COMMAND + 0) 5. • If a digit is pressed, the display shows Enter point number: #. As soon as a digit key is pressed, the display changes to Entering point number:. FRONT DOOR cannot by bypassed. indicates the system is programmed not to allow that point to be bypassed. (# is the point number entered) • Invalid point Please try again.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - UNBYPASS A POINT? (COMMAND + 0 + 0) UNBYPASS A POINT? (COMMAND + 0 + 0) 4. The display changes to show Enter point number or press next key. 5. If digits are pressed, the display shows Enter point number: #. As soon as a digit key is pressed, the display changes to Entering point number:.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SEND REPORT ? (COMMAND + 4+1 or 4+2) • FRONT DOOR is already bypassed. indicates that the point has already been bypassed. SEND REPORT ? (COMMAND + 4+1 or 4+2) Description This function tests the communication link between your security system and your security company. It is an important part of maintaining a high level of security for your property. • FRONT DOOR cannot by bypassed.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SEND REPORT ? (COMMAND + 4+1 or 4+2) If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. 6. If the test (or status) report doesn‘t successfully transmit to the central station, the keypad may sound a trouble tone and display Comm Fail Route Grp# (# = 1-4) after numerous unsuccessful attempts. Press NEXT> soft key repeatedly.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - REMOTE PROGRAM ? (COMMAND + 4 + 3) REMOTE PROGRAM ? (COMMAND + 4 + 3) 5. Press the 4 key then the 3 key. Description 6. Do not hang up the telephone. This function allows the user to initiate Remote Account Manager sessions. When the phone is ringing at the panel, the user initiates this function to have the panel seize the line. If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - REMOTE PROGRAM ? (COMMAND + 4 + 3) 11. At the conclusion of the programming session your system sends a report to the security company and then returns your telephone to normal service and your display to idle text. 15.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHANGE TIME/DATE (COMMAND + 4 + 5) CHANGE TIME/DATE (COMMAND + 4 + 5) 4. The time and date in your system must be correct for scheduled events to occur at the correct times. Check the time at least once a month to ensure accuracy. Use this function to set both the time and date. The system uses a 12-hour, AM/PM format. There is the option to continuously display the time and date in place of area status.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DOOR CONTROL (COMMAND + 4 + 6) Enter the new date using a MM/DD/YY format. DOOR CONTROL (COMMAND + 4 + 6) Ex: If the desired time is January 1, 2002, press 0 + 1 + 0 + 1 + 0 + 2 Description 7. Press the Enter> soft key or the [ENTER] button. 8. The Time/Date Display> soft key is used to show how the time and date entered will look. 9. The new time and/or date is displayed for 20 seconds before the display returns to idle text.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DOOR CONTROL (COMMAND + 4 + 6) Cycle Door 2. 1. If you wish to momentarily unlock an access door to allow a person into an area, press the Cycle Door> soft key. 2. The display will read *Cycle Door*1 2 3 4 5 6 7 8 if all door are at a normal state and are available. The display will read *Unlock Door*1 2 3 4 5 6 7 8 if all door are at a normal state and are available.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - Access Level For example, if you wanted to secure Door 3, press 3 then press the ENTER key. The display changes to show that all the doors are at a normal state except for Door 3, which is secured. 4. Access Level This function is used to manually enable/disable access authority levels assigned to users. It can also be used to temporarily disable a user’s access level instead of deleting and then re-adding the user. I have this feature.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHANGE DISPLAY (COMMAND + 4 + 9) 8. 9. After selecting whether to disable or enable the level, the display prompts you again to enter an Authority Level to modify. Press the
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - EXTEND CLOSING (COMMAND + 5 + 1) If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. Press NEXT> soft key repeatedly. When you reach the CHG DISPLAY ?> prompt, press its adjacent soft key.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - EXTEND CLOSING (COMMAND + 5 + 1) If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. If you have not armed or extended closing, the Please Close Now message and beep will reappear after 10 minutes. Your alarm company sets the length of time for the closing window.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG SKEDS ? (COMMAND + 5 + 2) CHG SKEDS ? (COMMAND + 5 + 2) 4. Description A Sked is a function programmed to be performed automatically at a scheduled time by your security system. You can change the scheduled time for some functions, disable the Sked and thus prevent it from automatically happening or restart a previously disabled Sked. Contact your security representative to determine what Skeds may be programmed for your system.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG SKEDS ? (COMMAND + 5 + 2) • Only on holiday> Pressing this soft key will enable the sked only on holidays and change the first line of the display to Skd 1 X 08:00AM without the X. • Except on holiday> Pressing this soft key will disable the sked on holidays and change the first line of the display to Skd 1 08:00am with the X. Consult your security company and determine which holidays have been programmed in your system.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG SKEDS ? (COMMAND + 5 + 2) Table 4: Sked Table SKED # SKED 1 SKED 2 SKED 3 SKED 4 SKED 5 SKED 6 SKED 7 SKED 8 SKED 9 SKED 10 SKED 11 SKED 12 SKED 13 SKED 14 SKED 15 SKED 16 SKED 17 SKED 18 SKED 19 SKED 20 SKED 21 SKED 22 SKED 23 SKED 24 SKED 25 SKED 26 SKED 27 SKED 28 SKED 29 SKED 30 SKED 31 SKED 32 SKED 33 SKED 34 SKED 35 SKED 36 SKED 37 SKED 38 SKED 39 SKED 40 Except on Holiday Yes / No Yes / No Yes / No Yes / No Yes / No Yes / No Yes / No
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DEL USER ? (COMMAND + 5 + 3) Enter the user number, not the passcode. (123 is as an example.) DEL USER ? (COMMAND + 5 + 3) This function allows a user to be deleted. This function will delete the passcode, Master User, and all sub-users associated with the user number. 1. Ensure your keypad shows idle disarmed text. Press either the Enter> soft key or the ENTER button. 5.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG RELAYS ? (COMMAND + 5 + 4) Enter the relay number then press either the CHG RELAYS ? (COMMAND + 5 + 4) Enter> soft key or the ENTER button. Your security company may program relays for automatic control and/or control from your keypad of devices such as premises lighting or entry gates. Contact them for further information regarding the use of relays in your security system. 1. Ensure your keypad shows idle disarmed text. 5.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG PASSCODES ? (COMMAND + 5 + 5) • To avoid conflicting with other passcodes and duress codes, your system does not let you change passcodes to an existing passcode or to within plus or minus 2 of an existing passcode. For example, if 1234 were an existing code, your system would not let you change your code to 1232, 1233, 1234, 1235, or 1236. Using Chg Passcodes 1. 5. The display changes to Enter new passcode: Enter the new passcode.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) If the passcode does not match, the command center will emit a error tone and display Passcode • not changed. • 9. The display automatically returns to idle text after three seconds. ADD/CHANGE USER (COMMAND + 5 + 6) 1. Ensure your keypad shows idle disarmed text. 2. Press the COMMAND key. The display shows *System Command*. 3. Press the 5 key and then the 6 key.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) 5. Enter the user number and press either the Enter> soft key or the ENTER button. 6. The display changes to show the user number entered and the user’s name (if any). If your system has a D9412 or D7412 Control Panel, this menu allows the following User items to be changed: • Passcode - Press the
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) 3. The display changes to Enter new passcode: Enter the new passcode. 4. The display changes to User 123 Change this user’s passcode? As soon as a number is pressed, Entering: appears on the third line next to the asterisks. Press the Yes> soft key to change the passcode.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) If the passcode does not match, the command center will emit an error tone and display Passcode not changed. If the user is authorized in Area 1, the displays changes to User’s current authority level: 14 for Area 1. (14 is used as an example here) 5. Press the
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) Press the soft key will change the display to
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) D9412/D7412: 3. If a card reader is connected to your system, the display changes to Present card to card reader now. D9112/D7212: Pressing the
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) 5. If the card is accepted, the display changes to either Card added. or Card changed if the card already exists in your system. 3. The display changes to Select Sub-User: Press the
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DEFAULT TEXT ? (COMMAND + 5 + 7) 5. Pressing the Next> soft key exits out of this function and returns the display to Add/Change Passcode depending on if a passcode already exists for the user. If the card you are trying to add to the system already exists, an error tone sounds and the display changes to Card already exists. Please try again. If 20 seconds elapse without pressing a key returns the display to idle text.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - FIRE TEST ? (COMMAND + 5 + 8) 4. The current state of the area is displayed for 3 seconds before returning to idle text. If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. FIRE TEST ? (COMMAND + 5 + 8) Press NEXT> soft key repeatedly. Use this function to test fire points and other 24-hour points to be certain they function properly.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DISPLAY REV ? (COMMAND + 5 + 9) 5. Press the Point information> soft key to see information about specific points that have not yet been tested. As you fault each point, your command center will display the point text for 60 seconds and ring the fire sounders for 2 seconds. This verifies that the detection device is working properly. Your system automatically resets smoke detectors.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands 2. 3. Press the COMMAND key. The display shows *System Command*. Press the 5 key and then the 9 key. If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. Press NEXT> soft key repeatedly. When you reach the DISPLAY REV ?> prompt, press its adjacent soft key. 4.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter) Using View Log 1. Press the View Log ?> soft key. 2. The display changes to Enter start date: 6. • Press the Go to last event> soft key to go to the last event in the log. 3. The display will show one of two ways depending on if the date entered was for an event first in the log or not. • If the date was for the first event in the log, it will display the next latest event in the log.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter) Using Print Log 1. Press the Print Log ?> soft key. 2. The display changes to Enter start date: 4. If the date entered is valid, the events for that date will be sent to a connected printer and the display will show Printing events. for three seconds, before returning to idle text. Press the Print all events> soft key to print all events in the log.
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter) If you know the point number, you can enter it by pressing its number key and then the ENTER key. 3. When all points have been tested, 0 points remain to be tested is displayed. The display will change to show the point that was entered. If the point is invalid the message “Invalid Point” or “This is not a valid walk point” appears. Press the
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter) • Low Brightness, • Contrast. Each of these selections have <- Level +> soft keys on either side of the display that allows you to increase (+) or decrease (-) the setting being displayed. The High and Low Brightness are associated to Command 49’s Bright Display and Dim Display settings.
D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Working with Multiple Areas from a Single Command Center Part IV: Multi-Area Use Working with Multiple Areas from a Single Command Center Each of the functions described in the preceding section on Advanced Commands is presented as though your system includes only one area.
D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - View Point Status 4. The display will change to show on the top line the area name and the current status on the second line. 5. Pressing the Next> soft key takes you to the next point in the area whereas the soft key will change the display to the next area and remain for 20 seconds or until the Next> soft key is pressed for the next area.
D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - MOVE TO AREA ? (COMMAND + 5 + 0) MOVE TO AREA ? (COMMAND + 5 + 0) 4. With this function you can perform tasks in an area other than the one you’re in without having to physically go to that area. Your access to other areas is limited by the scope of the command center and your authority level.
D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Turning On the System 7. 8. You are now able to perform tasks in this area. The number of areas to which you can move will be limited by the scope of the command center. 4.
D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Turn On the Entire System Without Delays 1. 2. Enter your passcode and press ENTER. The command center will display the following: Turn On the Entire System Without Delays You can use this Command Menu function to turn on the entire system, both perimeter and interior, without delays. You may use this function in all of the areas or some of the areas where your passcode has authority.
D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use 5. 6. If the Next> soft key is pressed, the first area that can be armed (based on passcode entered and user authority level) is displayed (AREA 1 WAREHOUSE is used an example of the first area that can be armed). Pressing the Arm> soft key will cause AREA 1 WAREHOUSE is now arming… to display for 3 seconds before the prompt to arm the next available area is displayed.
D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Turning Off the System 2. Press the Menu> key to enter the Command Menu. 7. If the Disarm> soft key is pressed to disarm all areas, the display changes to show Disarm: 12345678 All user-authorized areas are now disarmed. indicating that all areas are being 3. Press the Next> soft key repeatedly until you reach the DISARM ?> prompt then press the adjacent soft key. 4.
D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Turning Off the System 5. Enter your passcode and press ENTER. The passcode is shown as asterisks (*) when entered and advance from the right side of the display to the left until all the passcode digits are entered. 6. If the entered passcode is valid, the display changes to show DISARM ALL? Press the Disarm> soft key to disarm all armed areas. 7. Press the Next> soft key to go to the first armed area. 8.
D1260/D1260B | Owner's Manual | Appendix - Supplementary Information for Adding Passcodes If you are having trouble understanding the concept of authority levels, try this simple exercise. Refer to the column titled E/P on the next page. Notice that your security technician has marked some of the cells in this column with the letter “E”, others the letter “P”, while others are left blank. An “E” indicates that this function is enabled for all authority levels.
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet 22 23 24 25 26 27 28 29 30 32 33 34 35 Print Log ? User Command 7 ? User Command 9 ? Bypass a Point ? Unbypass a Point ? Reset Sensors ? Change Relays ? Remote Program ? Move To Area ? Display Rev ? Service Walk ? Default Text ? Change Skeds ? CMD 7 CMD 9 CMD 0 CMD 00 CMD 47 CMD 54 CMD 43 CMD 50 CMD 59 CMD 57 CMD 52 P P P P P E P P P E P P P Authority Levels E E E E E E E E E E E E E E E E E E E E E E E * Command Center Function Auth
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet User (Passcode) Worksheet (User 000 to 038) User ### Passcode User Group Note: Text shown in Times font (ex. 15) indicates sample text.
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet ♦ User (Token) Worksheet (User 000 to 038) D9412G/D7412G Only Use r Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 ## # Site Site Site Site 000 Not Available Card Data Card Data Card Data Card Data 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 Bosch Security Systems | 9/04 | 50410D 79
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet User (Passcode) Worksheet (User 039 to 075) User User Area Authority ### Passcode Group 1 2 3 4 5 6 7 8 039 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 39 040 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 40 041 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 41 042 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 42 043 __ __ __ __ __ __ ____ __ __ __ __ __
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet ♦ User (Token) Worksheet (User 039 to 075) D9412G/D7412G Only User ### Master ID ###-0 Site Card Data Sub-User ###-1 Site Card Data Sub-User ###-2 Site Card Data Sub-User ###-3 Site Card Data 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 071 072 073 074 075 Bosch Security Systems | 9/04 | 50410D 81
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet User (Passcode) Worksheet (User 076 to 114) (101-249 = D9412G only) User ### 076 Passcode __ __ __ __ __ __ 077 __ __ __ __ __ __ 078 __ __ __ __ __ __ 079 __ __ __ __ __ __ 080 __ __ __ __ __ __ 081 __ __ __ __ __ __ 082 __ __ __ __ __ __ 083 __ __ __ __ __ __ 084 __ __ __ __ __ __ 085 __ __ __ __ __ __ 086 __ __ __ __ __ __ 087 __ __ __ __ __ __ 088 __ __ __ __ __ __ 089 __ __ __ __ __ __ 090 __ __ __ __ __ __ 091
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet ♦ User (Token) Worksheet (User 076 to 114) D9412G/D7412G Only (101-249 = D9412G only) User ### Master ID ###-0 Site Card Data Sub-User ###-1 Site Card Data Sub-User ###-2 Site Card Data Sub-User ###-3 Site Card Data 076 077 078 079 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 Bosch Security Systems | 9/04 | 50410D 83
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet User (Passcode) Worksheet (User 115 to 150) (101-249 = D9412G only) User 84 User ### Passcode 115 Group Area Authority 1 2 3 4 5 6 7 8 User Name __ __ __ __ __ __ __ __ __ __ __ __ __ USER 115 116 __ __ __ __ __ __ __ __ __ __ __ __ __ USER 116 117 __ __ __ __ __ __ __ __ __ __ __ __ __ USER 117 118 __ __ __ __ __ __ __ __ __ __ __ __ __ USER 118 119 __ __ __ __ __ __ __ __ __ __ _
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet User (Token) Worksheet (User 115 to 150) (101-249 = D9412G only) User ### Master ID ###-0 Site Card Data Sub-User ###-1 Site Card Data Sub-User ###-2 Site Card Data Sub-User ###-3 Site Card Data 115 116 117 118 119 120 121 122 123 124 End RADXUSR1 Handler 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Bosch Security Systems | 9/04 | 50410D 85
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet User (Passcode) Worksheet (User 151 to 189) (101-249 = D9412G only) User ### Passcode User Group 1 2 Area Authority 3 4 5 6 7 8 151 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 151_ 152 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 152_ 153 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 153_ 154 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 154_ 155 __ __ __ __ __ __
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet User (Token) Worksheet (User 151 to 189) (101-249 = D9412G only) User Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 ### Site Site Site Site Card Data Card Data Card Data Card Data 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 Bosch Security Systems | 9/04 | 50410D 87
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet User (Passcode) Worksheet (User 190 to 226) (101-249 = D9412G only) User ### Passcode User Group Area Authority 1 2 3 4 5 6 7 8 User Name 190 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 190 191 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 191 192 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 192 193 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 193 194 __ __ __
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet ♦ User (Token) Worksheet (User 190 to 226) D9412G/D7412G Only (101-249 = D9412G only) User ### Master ID ###-0 Site Card Data Sub-User ###-1 Site Card Data Sub-User ###-2 Site Card Data Sub-User ###-3 Site Card Data 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 Bosch Security Systems | 9/04 | 50410D 89
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet User (Passcode) Worksheet (User 227 to 249) (101-249 = D9412G only) User User Area Authority ### Passcode Group 1 2 3 4 5 6 7 8 227 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 227 228 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 228 229 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 229 230 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 230 231 __ __ __ __ __
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet User (Token) Worksheet (User 227 to 249) (101-249 = D9412G only) User ### Master ID ###-0 Site Card Data Sub-User ###-1 Site Card Data Sub-User ###-2 Site Card Data Sub-User ###-3 Site Card Data 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 Bosch Security Systems | 9/04 | 50410D 91
D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet User (Passcode) Worksheet (Blank) User ### 92 Passcode User Group __ __ __ __ __ __ Area Authority User Name 1 2 3 4 5 6 7 8 ____ __ __ __ __ __ __ __ __ USER ___ __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER ___ __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER ___ __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER ___ __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER
D1260/D1260B | Owner's Manual | Appendix - Security System Limitations User (Token) Worksheet (Blank) Use r ### Master ID ###-0 Site Card Data Sub-User ###-1 Site Card Data Security System Limitations Not even the most advanced security system can guarantee protection against burglary, fire, or environmental threats.
D1260/D1260B | Owner's Manual | Appendix - Fire Safety and Evacuation Although having a security system may make you eligible for reduced insurance premiums, the system is no substitute for insurance. Warning devices cannot compensate you for loss of life or property. Figure 5: Smoke Detector Locations (Elevation View) 2 Fire Safety and Evacuation Residential fire is a leading cause of accidental death.
D1260/D1260B | Owner's Manual | Appendix - Standard Displays Standard Displays Exit Now Your command center uses standard and custom displays to show the status of the security system. Many standard displays are described below. Your system may not use all of them. Descriptions of your custom text follow. Arming your system starts exit delay time. The command center emits a repeating beep tone and displays AREA 1 WARE HOUSE is now arming for 3 seconds and then displays Exit Now!.
D1260/D1260B | Owner's Manual | Appendix - System Trouble Displays System Trouble Displays Service AC Fail If you see any of the system trouble displays shown below, contact your security company to determine whether repairs are needed. The Silence> soft key is only displayed if a trouble tone is present. Press the Silence> soft key to silence the following trouble conditions. Call for Service Indicates that AC power to the security system is interrupted.
D1260/D1260B | Owner's Manual | Appendix - System Trouble Displays Service Phone Line #1 (or #2) 24 Hour Point Bypass Indicates telephone line trouble. Call your phone company from another phone to report telephone trouble. This message may not appear in some systems. This display indicates that 24-hour points have been bypassed. Service Printer Printer number could also be 18 or 19 Indicates that a local printer (if installed) at your premises is in a trouble condition.
D1260/D1260B | Owner's Manual | Appendix - Security System Glossary Security System Glossary Area A group of detection devices connected to your security system. Arm To turn on your controlled points (burglar detection devices). When an area is armed and a controlled point trips, an alarm occurs or entry delay begins. When an area is disarmed, faulting controlled points does not generate alarms.
D1260/D1260B | Owner's Manual | Appendix - Maintenance and Service Maintenance and Service This security system requires very little maintenance, however, you should test the system weekly to ensure it is working properly. A test schedule and maintenance program can be arranged. If you notice a change in operation during normal use or testing, call for service as soon as possible. Do not attempt to repair the control panel, command centers, or detectors yourself.
Bosch Security Systems 130 Perinton Parkway Fairport, NY 14450-9199 Customer Service: (800) 289-0096 Technical Support: (888) 886-6189 © 2004 Bosch Security Systems 50410D
