Display manual

10
select Y, and press MODE to confirm the selection. Otherwise select N to enter Throttle
Level Enable Setting, HL default value is N.
Throttle Enable/Disable I nterface
Throttle Level Enable/Disable
HF-Y means throttle level is enabled, HF-N means throttle level is disab led. Press
UP/DOWN to select Y or N, and press MODE to confirm and enter Throttle Enable Setting
page. Hold MODE to confirm and return to previous menu. HF default value is N.
Throttle Level Enable/Disable
Interface
◆
System Setting
Delay time setting of battery power
DLY means delay time of battery power setting. Press UP/DOWN to select delay tim e
3, 6, 12s, then press MODE to confirm and enter the max speed limited. The default time is
3s.
Delay time of battery power interface
Max speed limited
MAX SPD means max speed limited setting . Press UP/DOWN to Set the max speed
from 25Km /h~40 Km/h. Press MODE to confirm and enter Button PAS Setting. The default
is 40Km/h.