Display manual

11
Interface of max speed limited setting
■
This setting is the priority version. The speed is the maximum setted by
manufacturer.
Button PAS Setting
PUS means button push settin g . Press Up/DOWN to choose Y or N. Y means button
push is enabled, N means button push is disabled. Press MODE to confirm and enter into
PAS speed setting.The default value is Y .
Interface of PAS push
PAS Speed Setting
Adjust push speed by setting PAS to meet rider’s requirements. Press UP/DOWN to
adjust from 20% to 35%, press MODE to confirm and enter into slowly start up. Default
value is 25%.
Interface of PAS speed setting
Slowly Start up Setting
SSP means slowly start up. The range is 1-4, 4 is the slowest. Press Up/DOWN to
choose, press MODE to confirm and turn to Delay time setting of bat te r y power page. Hold
MODE to confirm and return to previous menu. The default value is 1.