Display manual

13
Power-on
Password Mod ify
Interface
◆
Exit setting
In the setting state, pressing MODE (less than 2s) is to confirm the input. Holding
MODE (more than 2s) is to save the setting, and then exit the current setting. Holding
DOWN (more than 2s) is to cancel the operating but not saving setting data, and then
return to previous menu.
■ If there is not any operations in one minute, display will exit the setting state.
Recover default setting
DEF means recover default setting. Press both UP and MODE more than 2 seconds to
enter recover default setting. Press UP/DOWN to choose Y or N. N means that do not
recover default setting. Y means that recovers default setting. When it is Y, hold MODE to
recover default setting, the display shows DEF-00 at the sam e tim e, and then return to
general display state.
The default state is N.
Recover Default Setting Interface
Operation Cautions
Be care of the safety use. Don’t attempt to release the connector when battery is on power.
◆ Try to avoid hitting .
◆Don’t split the waterproof sticker
to a void affecting the waterproof performance.
◆Don’t modify system parameters to a void parameters disorder.
◆Make the display repaired when error code appears.