Display manual

3
◆
Mileage Interface
After starting up the display, default is total distance. Press MODE to shift the
indicating information between single trip distance and total distance.
Trip Distance Interface Total Distance Interface
◆
Push Cruise Control
Hold DOWN for 2 seconds to enter the mode of power assistant walk. The e-bike will
go on at a uniform speed of 6 Km/h when you hold DOWN always. P shows on the screen
at the same time. Otherwise immediately stop 6 km/h output power when the DOWN is
released and interface returns to the mode before the power assistant walk.
Push Cruise control
■
“Push Cruise Control” function can on ly be used to push the e-bike by hands.
Please don’t use
this function when riding.
◆
Turn on/off Backlight
Hold UP for 2 seconds to turn on the backlight of the display, the headlight will be
power on at the same time. Hold UP for 2 seconds again, backlight turned off.
Turn On/Off Backlight
◆
PAS Level Selection
Press UP/DOWN to change the output power of the motor. The defaul t power ranges