Display manual

4
from level 0 to level 5. The output power is 0 on Level 0. Level 1 is the minimu m power.
Level 5 is the maximum power. Gear to lev el 5 and then pr ess UP, the interface displays 5 still
and 5 flashing prompting top; Gear to level 0 and then press DOWN, the interface displays 0 still
and 0 fl ashing prom pt ing low. The default value is level 1.
PAS Level 3
◆
Battery Indicator
The 6 batter y bars represent the capacity of the battery. When the battery is in low
voltage, battery frame will flash to notice that the battery needs to be recharged immediately.
Low Voltage Flash
Battery Indicator
Error Code Information
If there are errors about the electronic control system, the error code will appear
automatically. Here is the detail information of the error code in
Attached list 1
.
Error Code
Indicator
■ Make the display repaired when error code
appears
General Setting
Hold MODE button to start the display, then hold both UP and DOWN for 2 seconds to
enter general setting menu.
■
All the Settings are operated in the case of zero speed