Display manual

5
◆
Trip Dist ance Clear ance
TC means single trip distance clearance setting, Press Up/DOWN to choose Y/N to
clear trip distance. The def ault is N. Press MODE to
confirm
and enter backlight contrast
setting.Various symbol definition refer to
Attached list 4.
T
rip Distance Clearance Setting Interface
◆
Backlight Contrast setting
BL means backlight contrast setting. Level 1 is the low brightness. Level 2 is the middle
brightness. Level 3 is high brightness. The default level is 1.
Press UP/DOWN to modify the backlight brightness. Press MODE to confirm and exit
the general setting.
Backlight brightness Setting Interface
◆ Inch and Metric Conversion
U means unit setting, 1 is inch, 2 is metric.Press UP/DOWN
to change the number to
convert. Press MODE to confirm and enter backlight contrast setting. Hold MODE to
confirm and exit general setting. U default value is 2.
Inch and Metric Conversion Settings Interface