User Manual

4 5
Thanks for choosing myCharge.
In The Box
• myChargeTrek
• Lanyard
• Owner’sManual
• WarrantyManual
Section I: Quick Start
1. Charge up your Trek by plugging it into a USB power
 adapterorcomputer.AsTrekcharges,LEDsontheunit
 willsequentiallyilluminate.Whentheunitisfullycharged,
 allLEDsarelit.Pressthelevelcheckbuttontoseehow
much power is available.
2.Connectyourdevicetoeithertheip-outAppleDock
Connector or the Micro-USB connector.
3.UnplugyouriPod,iPhone,orMicro-USBdevicewhenit’s
charged and go! Your Trek will automatically power off
after your devices are unplugged.
Section II: Charging Trek
To charge your Trek, connect it to a USB power source
(Apple iPhone adapter, notebook USB port) with the on-
board green USB input cable. Times to charge the Trek
varybasedonwhatit’spluggedinto.Youcanexpectafull
charge from an iPhone USB adapter in about three hours, or
from a standard notebook USB port in about five hours.
Note: It is normal for your Trek to be warm to the touch
while in use.
USB Charging
Cable
AppleDock
Connector
Micro-USB
Connector
LEDs
Multifunction
Button
Charge from a USB adapter or your computer