Instruction Manual

- 5 -
7. Temperature setting button
POWER SOCKET PANEL:
Front side:
The USB socket in the above panel is 5V/3A. it is normally for electrical appliance charge or LED
light charge. It is forbidden to charge the appliance which is not within voltage range.
When you switch on the Emergency override, the control panel is out of use, compressor will keep
on running. It is suggested to use only when the control panel is out of function. Fridge power
consumption is higher when use emergency override, but battery protect function is still working.
Back side:
Both sides DC socket have the same function.
MAINTENANCE AND REGULAR CLEANING
 Always disconnect the power supply before cleaning. Clean the inside of the cabinet
whenever necessary using a warm solution of water and bicarbonate of soda(1
tablespoon to every 2 liters of water) dry with a soft cloth
 Dirt from the condenser should be cleaned by a qualified technician when
necessary.
NOT A MALFUNCTION
 It is normal to hear gurgling sounds caused by the flow of refrigerant when each
cooling cycle ends.
 The surface temperature of the compressor can reach 70-90℃ when running.
 The noise emitted by the cooling fan on the condenser is a normal condition.