Radio MWC2-8 MWC2-8 800MHz Receiver with FM Radio Option Operation Manual man_MWC28_V8 www.myeclubtv.
CONTENTS Specifications………………………………………….…… Receiver Orientation (Front / Rear)………………………. Keypad – Key Identification………………………….……. Main Features………………………………………………. Display and Icon Identification…………….………………. Programming - Near / Far Reception Setting………………. Programming the Receiver (Auto Programming)………….. Programming the Receiver (Manual) ……………………. FM Radio, FM Radio Disable…………………………..….. Attaching the Receiver……………………..…………... ….. Intellijack…………………….……………………………... Warranty Information…………..…………..….……..
RECEIVER ASSEMBLY - FRONT VIEW LCD DISPLAY FRONT MOUNTING SCREWS UNSCREW TO RELEASE the MOUNTING BASE ASSEMBLY. (PLEASE READ “ATTACHING THE RECEIVER” PGS.
MYE Entertainment Wireless 800MHz TV Receiver Model: MWC2-8 The MYE MWC2-8 Receiver allows the user to listen to a TV or other audio source connected to a compatible 900MHz transmitter. It can also be used as an FM radio receiver. The MWC2-8 is powered by using a MYE Entertainment CSAFE cable plugged directly into any standard cardio CSAFE port or MYE 9 Volt AC Adapter.
DISPLAY and ICON IDENTIFICATION CURRENT CHANNEL OR FM FREQUENCY CHANNEL ICON MUTE “ON” FAULTY HEADPHONE JACK ICON FREQUENCY PRESET ICON 800MHz MODE SELECTED FM RECEIVER MODE SELECTED FM FREQUENCY ICON EQ PRESETS VOLUME LEVEL INDICATOR Programming - Far/Near Reception This feature provides the ability to set the reception sensitivity of each MYE Entertainment MWC2-8 receiver depending on the proximity between the receiver and transmitter.
Programming The MYE Entertainment MWC2-8 receiver must be programmed to detect and lock in the MYE Entertainment transmitters or other brands of transmitters listed below. The receiver features both “auto” and “manual” program modes. In the auto mode the MWC2-8 will automatically search for and program in your transmitters. The manual mode provides the ability to add or erase a specific transmitter channel or unwanted frequency caused by spurious emissions or other local elements. Auto Program Mode 1.
FM RADIO Pressing the “FM” key switches the audio reception mode from 800MHz to FM. The FM Radio option is set to receive FM radio broadcasts from 87.5 to 107.9. Use the SCAN key to scan automatically up to next available FM channel. Use the channel UP / Down keys to move up / down one FM frequency at a time. FM RADIO - Disable The FM Radio function may be disabled (or enabled) by holding down the ‘FM’ button for three seconds at power up. The factory default for FM Radio is “enabled.” 1.
Attaching the Receiver The MWC2-8 receiver uses the Secure Grip Mounting Band. Mounting the receiver is now quick, secure and discrete. It is required that the Secure Grip Mounting Band always be used when installing MYE Entertainment MWC2-8 receivers. Before you begin: Unscrew the MOUNTING BASE ASSEMBLY from the receiver by using the FRONT MOUNTING SREWS. (See page 3 – Receiver Assembly Front View.) Wrap the Secure Grip Band around the intended mounting pole and cut to fit.
Position and install the Rear Flange onto the Mounting Base. Interlocking gears assure secure positioning regardless of the rotation. Insert one end of the CSAFE* cable into the RJ45 jack on the back of the receiver assembly. MYE ENTERTAINMENT receivers can be powered by CSAFE ports on CSAFE compliant cardio equipment or MYE Entertainment 9 volt power supplies.
IntelliJack - Self Diagnostic Headphone Jack The IntelliJack self diagnostic headphone circuit detects when the headphone jack has failed or been damaged. When a faulty headphone jack is detected, a flashing “headphone” icon appears in the LCD display. It will remain on until a new jack is installed and the icon reset. To Replace the Intellijack: 1. Loosen the two screws evenly on the bottom of the IntelliJack module and remove. 2. Carefully insert new IntelliJack module without bending contact pins. 3.
WARRANTY PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR MYE ENTERTAINMENT PRODUCT. BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS. LIMITED WARRANTY MYE ENTERTAINMENT WARRANTS ALL NEW MYE ENTERTAINMENTPRODUCTS TO BE FREE FROM DEFECTS IN MATERIALS AND MANUFACTURERS FOR THE WARRANTY PERIODS SET FORTH BELOW. THE WARRANTY PERIODS COMMENCE ON THE INVOICE DATE OF THE ORIGINAL PURCHASE.
WARRANTY – cont. THE WARRANTIES PROVIDED HEREIN ARE THE EXCLUSIVE WARRANTIES GIVEN BY MYE ENTERTAINMENT AND SUPERSEDE ANY PRIOR, CONTRARY OR ADDITIONAL REPRESENTATIONS, WHETHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THAT APPLY TO ANY PARTS DESCRIBED ABOVE ARE LIMITED IN DURATION TO THE PERIODS OF EXPRESS WARRANTIES GIVEN ABOVE FOR THOSE SAME PARTS. MYE ENTERTAINMENTHEREBY DISCLAIMS AND EXCLUDES THOSE WARRANTIES THEREAFTER.