SDS

MSDS #
:
2497
Section 15. Regulatory information
Montreal Protocol (Annexes A, B, C, E)
Not listed.
International lists
National inventory
Australia
:
All components are listed or exempted.
China
:
All components are listed or exempted.
Europe
:
All components are listed or exempted.
Japan
:
Not determined.
Republic of Korea
:
All components are listed or exempted.
Malaysia
:
Not determined.
New Zealand
:
Not determined.
Philippines
:
All components are listed or exempted.
Taiwan
:
Not determined.
None of the components are listed.
WHMIS (Canada)
Not controlled under WHMIS (Canada).
:
Canada
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
and the MSDS contains all the information required by the Controlled Products Regulations.
Canadian NPRI
:
Canada inventory; DSL/
NDSL
:
All components are listed or exempted.
CEPA Toxic substances
:
None of the components are listed.
Canadian lists
Section 16. Other information
Hazardous Material Information System (U.S.A.)
1
1
0
0
1
1
*
National Fire Protection Association (U.S.A.)
Health
Special
Instability/Reactivity
Flammability
Health
Flammability
Physical hazards
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS® ratings are not required on SDSs under 29 CFR 1910.
1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS®
program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials
may be purchased exclusively from J. J. Keller (800) 327-6868.
The customer is responsible for determining the PPE code for this material.
Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency
Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is
not the complete and official position of the National Fire Protection Association, on the referenced subject
which is represented only by the standard in its entirety.
Validated on 6/14/2015.
10/11