User manual

Connecting and Configuring your Router
16
Welcome Screen
After you insert the CD into your
CD-ROM drive, the Wizard’s welcome
screen will appear. Make sure you have
not connected the Router at this point.
If you have connected your Router,
please reconnect your computer
directly to the modem. Click “Run the
Quick Installation Software” when you
are ready to move on.
Progress Screen
The Quick Installation Software will
show you a progress screen each
time a step in the setup has been
completed. Each time you see the
progress screen, click “Next” when you
are ready to move to the next step.
Examining Settings
The Wizard will now examine your
computer’s network settings and
gather information needed to complete
the Router’s connection to the Internet.
When the Wizard is finished examining
your computer, click “Next” to continue.
Multiple Network Adapters
Found Screen
If you have more than one network
adapter installed in your computer, this
screen will appear. If you have more
than one network adapter installed in
your computer, the Wizard will need
to know which adapter is connected
to your modem. Select the network
adapter that is connected to your
modem from the list and click “Next”.
If you are not sure which adapter to
choose, select the adapter at the top
of the list. If you mistakenly choose the
wrong adapter now, you will be able to
choose a different one later.
Downloaded from www.Manualslib.com manuals search engine