ZeTrack+ -USER GUIDE-
TA B L E O F C O N T E N T S GET STARTED 1. What’s in the box 2. Overview 3. Charging 4. Basic operations 5. Display 6. Wearing 03 03 04 05 06 07 PAIRING 7. Pairing 8. Update 07 09 ACTIVITY TRACKING & BODY TEMPERATURE MONITORING 9. Activity 10. Heart rate 11. Sleep 12. Body temperature 09 11 11 12 CONNECTED FEATURES 13. Reminders 14. Notification 15. Weather 16. Inactivity alert 17. Camera remote 18. Apps 19. Settings 14 14 15 15 16 16 17 MAINTENANCE 20. Unpair/update/reset/delete 21.
1 . BOX CONTENTS ZETRACK+ GET STARTED GUIDE ZeTrack+ 2 .
3. CHARGING I C HARGING YOUR ZETRACK+ 1. Remove the band from your ZeTrack+. 2. Connect the built-in USB plug to a power supply. A battery indicator will be displayed on your ZeTrack+ screen. I C HARGING TIME It takes about one hour to charge ZeTrack+, the battery indicator on your ZeTrack+ screen will state that your device is fully charged. I V IEW THE BATTERY LEVEL View the battery indicator on ZeTrack+’s home screen or in the MyKronoz Health app.
4 . BASIC OPERATIONS & GESTURES ZeTrack+ features a colorful IPS-LCD display and a single touch key that llows you to navigate through the ZeTrack+ by either simply tapping or pressing and holding down on the touch key. I T URN ON THE SCREEN Tap the touch key when the screen is in standby mode I M OVE BETWEEN SCREENS Simply tap the touch key to toggle from one screen to another. The home screen is the watch face I E NTER A MENU Press and hold the touch key on the screen in which you want to access.
5 . SCREENS 26 8000 STEPS 7.5 KM MIN MAX 330 KCAL 4 °C 00:00 14°C 23°C HOURS ACTIVITY RESUME WEATHER NOTIFICATIONS HEART RATE SLEEP BODY TEMPERATURE APPS STOPWATCH FIND MY PHONE SETTINGS WRIST FLICK SOUND BRIGHTNESS WATCH INFO CAMERA REMOTE INCOMING CALL INACTIVITY ALERT HOME SCREEN 41 40 39 38 37 36 °C 36.
6 . WEARING I D A I LY WEA R To measure your heart rate and body temperature more accurately with the ZeTrack+, wear the wristband firmly around your lower arm just above the wrist. We recommend that you wear your ZeTrack+ on your non-dominant wrist in order to increase the sensitivity of step counting and should reduce any under counting of steps. Keep your ZeTrack+ and wristband clean and dry to maximize comfort and prevent any long-term damage to the activity tracker.
Before pairing, make sure to follow the steps below in order to set up your ZeTrack+ to your smartphone: 1. Make sure your mobile device is running Android 6.0+ or iOS 9.0+ and supports Bluetooth® 4.0 BLE. 2. Turn on the Bluetooth on your mobile device if it isn’t already on. 3. On your mobile device, download the MyKronoz App from the Google Playstore or App store and install it. 4. Create an account or login using an existing account. 5.
8 . FIRMWARE UPDATE Keep your ZeTrack+ updated to get the latest feature improvements and product updates. When an update is ready to install, you will receive a notification from the MyKronoz app. After you start the update, a progress bar will appear on the app and on the activity tracker. Make sure your ZeTrack+ and app are near each other during the update progress. Before you update the activity tracker, make sure your ZeTrack+ is charged at least 30% or more before you update. 9 .
To save your latest activity, go to the Activity tab of the MyKronoz App. Your activity will sync automatically as soon as you open this page. To sync your data manually, slide your finger down the screen. Sofia You can also monitor your activity data and history from the MyKronoz Mobile App. On the main activity screen, you can check your performance level against your daily goals. Click on any activity bar to get a detailed graph of your daily, weekly and monthly performance.
1 0 . HEART RATE Equipped with an optical heart rate sensor, ZeTrack+ measures manually or automatically your heart rate frequency throughout the day. I MANUAL MODE 1. Go to Heart rate screen 2. As soon as you reach this screen, ZeTrack+ will start measuring your heart rate. I AUTO MODE 1. Open the MyKronoz App 2. Tap on Settings tab 3. Tap on Advanced settings 4. Eable Auto track Once activated, two green LED lights will start flashing on the back of the device. 1 1 .
1 2 . BODY TEMPERATURE MEASURE YOUR BODY TEMPERATURE WITH ZETRACK+ 41 40 39 38 37 36 °C 36.8 Thanks to its temperature sensor, ZeTrack+ can automatically measure and track your body temperature throughout the day and alert you if your temperature exceeds the normal range. Using sophisticated algorithms and a precisely calibrated sensor, ZeTrack+ measures the wrist temperature and converts this temperature to display accurate body temperature.
37.1°C Normal body temperature readings will vary within these ranges due to multifactorial elements, such as taking medication, age, physical activity, time of day and even a menstrual cycle, can cause the body temperature to vary by one degree. In adults, the following temperatures suggest that someone has a fever: • at least 100.4°F (38°C) is a fever • above 103.1°F (39.5°C) is a high fever • above 105.
1 3 . REMINDERS You can set up reminders, and choose the type of reminder and preferred time and day. ZeTrack+will gently vibrate and display the corresponding reminder icon to alert you. 1. Open the MyKronoz App 2. Tap on Reminders tab 3. Add daily life reminders and save A single tap on the touch key can dismiss the reminder. If not dismissed, the same alert will repeat according to the saved snooze time. 1 4 .
1 5 . WEATHER To check the current weather, go to the Weather interface on your ZeTrack+. By default, the weather screen shows your current location. 26°C MIN MAX i 14°C 23°C To change the temperature unit or set your location manuall : 1. Open the MyKronoz App 2. Tap on Settings tab 3. Tap on Advanced settings 4. Select Weather If the weather condition for your current location seems wrong or doesn’t appear, make sure that the location services for the MyKronoz App are switched ON. 1 6 .
1 7 . CAMERA REMOTE This feature is useful for group photos or selfies. 1. Open the MyKronoz App 2. Tap on Settings tab 3. Select Camera 4. Move your wrist to release the camera shutter As soon as you open the camera from the MyKronoz App, a message will pop up on the ZeTrack+ screen to confirm that the feature is enabled. Just shake your wrist to launch the counter and take a successful photo. This feature only works if you open the camera from the MyKronoz App.
1 9 . SETTINGS Several applications can be found in this menu: I WRIST FLICK The wrist flick mode will enable you to light-up your screen by simply lifting your wrist towards your face. By default this feature is disabled in order to save battery I VIBRATION Tap the touch key to set the vibration ON or OFF I BRIGHTNESS Tap the touch key to set the brightness I WATCH INFO i To quit the Settings menu, access to the exit door interface - 17 - and long press the touch key.
2 0 . UNPAIR, RESET & DELETE ZeTrack+_A0C3 I UNPAIR If you want to pair your ZeTrack+ with another smartphone, pair another MyKronoz device, give it to another person or return it, go to the MyKronoz App: 1. Tap on Settings tab 2. Tap on Paired devices 3. Click on Unpair i For iOS users, make sure to forget the device from the Bluetooth® settings of your iPhone. I RESET 1. Tap on Settings tab 2. Tap on Paired devices 3. Click on Reset I DELETE 1. Tap on Settings tab 2. Tap on Paired devices 3.
2 1 . TECH SPECS Dimensions 41 x 20 x 10,6 mm Watch band size 16 mm (width) Weight 26 gr Display size and resolution IPS-LCD 0.96” / 128 x 64 px Material ABS/TPE Battery type Lithium polymer 90 mAh Battery life Up to 5 days Connectivity Bluetooth® BLE 4.
SAFETY INSTRUCTIONS Before using the device, read these instructions carefully: • ZeTrack+ has built-in batteries. Do not disassemble the battery on your own. KRONOZ LLC is not responsible for any damage or personal injury caused by the removal of the battery or any component. • Do not expose your product to extremely high or low temperatures. Excessive temperature during charging could cause heat, smoke, fire or deformation of the battery or even explosion.
REGULARY NOTICE USA FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
RF EXPOSURE STATEMENTS This device complies with the ISED RSS-102 RF exposure requirement set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Cet appareil est conforme aux exigences d’exposition RF de l‘ISED RSS-102 définies pour un environnement non contrôlé et est sûr pour le fonctionnement prévu comme décrit dans ce manuel.
JOIN US @MYKRONOZ m y k r o n o z .
