User's Manual

AMB i.t. B.V. Installation Manual AMBrc - Rev. 1.1b 13
5. Installation of the rechargeable transponder
The transponder must be mounted
horizontally
at all times, preferably inside the RC
model car against the side, with the fixing pin pointing upwards or downwards. The
position of the transponder must be identical in all RC model cars competing in the race.
Put a washer around the fixing pin and fix the transponder with a fixing clip.
Transponders may not be positioned more than
15 cm / 6’’
(away) from the detection
loop, with no metal or carbon fiber between it. It is preferable to mount the transponder
as close as possible to the detection loop. Make sure the transponder can not get detached
during a race.
For OFF-ROAD RC model cars, the transponder may be fixed underneath the rear wing
of the RC model car.
When the pin has been forcefully removed from the transponder, the transponder cover
can be replaced (part number 00551102).
Body clip
Washer
Max 15 cm
(6”)