User's Manual

AMB i.t. B.V. Installation Manual AMBrc - Rev. 1.1b 17
8.
Technical Specifications
AMBrc Decoder
Dimensions : 120x170x55mm / 4.7"x6.7”x2.2"
Weight : 0.8 kg / 1.9lb
Clock stability : 25 PPM
Timebase Resolution : 0.001s in AMBrc mode
Timing Resolution : better than timebase of used AMB transponder type
Memory : 5000 passings
Temperature range : 0 - 50C / 32 - 122F
Humidity range : 10% to 90% relative
Operating voltage range : 10 to 16VDC (12VDC input)
Power consumption : 0.1A via 12VDC input
: 0.3A via USB
Output : RS232, 9600 baud, 8 bit, 1 stop-bit, no parity
Number of loops : 1 (or 2 with help of T splitter)
Max. track width : max. 10m (33’), when 2 loops are used: 5 m / 16.5”
Aux. Inputs : 3x opto coupled 4-12 VDC / 5-15 mA
Aux. Outputs : 2x opto coupled, max 10mA
Compatible with the following
AMB transponder types : AMBrc (rechargeable type), AMBrc direct power
USB connection : not implemented yet, but power can be applied.
AMBrc Rechargeable Transponder
Dimensions : 35x31x12 mm / approx. 1.4”x1.2”x 0.5”
Weight : 22 g
Humidity : max. 90% relative
Max. speed : 120 km/h / 75 mph.
Temperature range : 0-50 C / 32-122 F
Operating time : min. 18 hrs
Charge indicator : LED indicator green / red
Signal transfer : magnetic induction
Resolution timebase : 3 ms
Transponder position : max. height 15 cm / 6’’
Charging voltage : 3.3 VDC
Transponder Charger
Dimensions : 380x117x65 mm / approx. 15’’x5’’x3’’
Capacity : 20 transponders
Power supply : 10 to 16VDC / 0.4 A via 115/230 VAC adapter
AMBrc Direct Powered Transponder
Dimensions : 22x38x7 mm / approx. 0.9”x1.5”x 0.3”
Weight : 10 g
Humidity : max. 90% relative
Max. speed : 120 km/h / 75 mph.
Temperature range : 0-50 C / 32-122 F
Operating time : Unlimited
Signal transfer : magnetic induction
Resolution timebase : 3 ms
Transponder position : max. height 15 cm / 6’’
Power : Power feed from a free receiver channel (ch3 or batt)
Connection Plug : Connect using a standard servo plug
Operating Time : Active while external power applied
Power consumption : Uses less than10mA
Operating voltage : 4 –8 VDC
Detection Loop
Track width : max. 10 m / 33 ft (or 2x 5 m / 16.5 ft)
Coax to decoder : max. 200 m / 660 ft
Specifications are subject to change without notice