User's Manual

X2 Transponder Manual (Revision 2.20) Page 25 of 34
3. Connect the X2 RaceKey mount as follows:
 Connect power cable connector to the X2 RaceKey mount and connect the open end wires to a
12 VDC supply in your vehicle (check the cable and vehicle wiring specifications for correct
connection). The brown cable is 12V and the Blue cable is Gnd. The black and white cable can be
ignored.
 Connect the connector cable to the X2 Transponder and feed it to the connector on the RaceKey
mount.
 Mount the X2 RaceKey mount in sight of the driver on the dashboard or steering.
4. Insert the X2 RaceKey in the RaceKey Mount:
 During startup all three indicator lights will flash various colors.
 After startup the “Subscription” indicator light will blink green (or red if the subscription is not
active) before it turns off.