User's Manual

X2 Transponder Manual (Revision 2.20) Page 27 of 34
6. Maintenance
Maintenance can be described as, but not limited to:
 Checking and testing components;
 Cleaning the unit and individual components - accumulated dirt can hamper unit operations;
 Charging the unit;
 Troubleshooting any malfunctions that may occur on the unit during operation.
6.1. Periodic maintenance schedules
Type of maintenance
Daily
100 hours
300 hours
As required
Clean
X
X
Charging
X
Replace parts and accessories
X
6.2. Cleaning
Take a clean soft cloth or brush and moisten it with clean water
 Do not use an abrasive cleaning liquid.
 Do not use high pressure waterguns or other (dish)washing machines to clean or rinse the
transponders.
 Do not clean transponders with automotive cleaning products or other detergents.
 Use the moist cloth or brush to clean the X2 Transponder, paying particular attention to remove any
dirt on the connector pins. Dry off any excess moisture.
 Take a fresh clean cloth and moisten it with clean water.
 Clean the X2 Transponder making sure not to get moisture on the electrical connector where the USB
cable can be connected.
 Dry off any excess moisture.
 If necessary use clean cotton tips to clean any dirt off the connectors on the X2 RaceKey and the X2
Transponder.