User's Manual

X2 Transponder Manual (Revision 2.20) Page 6 of 34
2. Safety
2.1. Important safety instructions
Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings before
operating the X2 Transponder equipment.
1. Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.
2. Do not install equipment near any heat sources, or other equipment that produce heat (the maximum
operating temperature should not exceed 140°F/60°C).
3. Never spill liquid of any kind on the equipment.
4. Take precautions to protect the equipment from power and lightning surges.
5. Adjust only those controls specified in the operating instructions.
6. Operate the equipment only from the type of power source indicated on the label.
7. Unless qualified, do not attempt to service damaged equipment yourself. Refer all servicing to
qualified service personnel.
8. Install in accordance with the manufacturer's instructions in accordance with applicable local codes.
9. Use only accessories specified by the manufacturer.
10. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with this manual, may cause interference to radio communications.
11. Operation of this equipment in a residential area may cause transmission interference. Do not use the
equipment in residential areas.
12. Keep the product out of reach of children
CAUTION
The Low Voltage power supply unit must comply with EN/UL 60950. The power
supply must be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage
- Limited Power Source)
2.2. UL Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling
aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in Standard(s) for
Safety for Information Technology Equipment, UL 60950-1. UL Certification does not cover the performance or
reliability of the security or signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.