Owners manual

ManualsBrandsMylaptopstandrocks ManualsComputer AccessoriesThe MylaptopstandRocks is designed for 19" width or smaller and is Adjustable to all sizes in between. With Printer Stand

STEP 1

1.30" Sway Bar

2.Sway Bar Holder

3.Center stand leg

4.Latch Plate

5.Center post stand

A.The Sway Bar Holder is locked

into place, do not adjust. Sway Bar

holder is aligned with Center stand

leg.

B.Slide the 30" Sway Bar into the

3/8" sway bar hole. Place into

center of center stand leg. Use the

Velcro strap to hold down the

Sway Bar against the center leg.

C.Place the 2 outside laptop stand

legs aligned with your chair.

D.Lift the side of chair up which

your laptop stand is on. Slide latch

plate under your chair leg.

E. The center post stand should be

6" to 8" away from your chair.

F. Tighten socket screw on Sway

Bar with Allen wrench.

G. The stand Center post should be

positioned from center to the end

of your chair. Adjust as needed.

CENTER POST STAND

SWAY BAR HOLDER

HHHHHHOLHOLDER

HOLDER

30" SWAY BAR

LATCH PLATE

VELCRO STRAP FOR SWAY BAR

AND THE CENTER LEG

BETWEEN BRACES OF LEG.

Summary of content (7 pages)

PAGE 1
STEP 1 STEP 1 1.30" Sway Bar 2.Sway Bar Holder 3.Center stand leg 4.Latch Plate 5.Center post stand A.The Sway Bar Holder is locked into place, do not adjust. Sway Bar holder is aligned with Center stand leg. B.Slide the 30" Sway Bar into the 3/8" sway bar hole. Place into center of center stand leg. Use the Velcro strap to hold down the Sway Bar against the center leg. C.Place the 2 outside laptop stand legs aligned with your chair. D.Lift the side of chair up which your laptop stand is on.
PAGE 3
STEP 2 STEP 2 1.Center Bracket/Mending Bracket 2.Mouse Pad 3.Kick Stand(not showing place into mending plate of bracket then tighten) Attached the Center Bracket on to Center stand post. The mending plate will be facing your chair. Attach Mouse Pad to center bracket. Slide Kick Stand holder between Center stand post and Mending Bracket. Adjust Kick Stand to 1/4" away from Chair then tighten the Wing Knob. The Kick Stand should be on a solid base on chair. Generally outside or on wood frame.
PAGE 5
STEP 3 BOOM ARM HOLDER Laptop Holder and Wing Nut 24" BOOM ARM STEP 3 - FINAL STEP 1. 24" Boom Arm 2. Boom Arm holder Place the boom arm into the boom arm holder. The Boom Arm holder moves up and down. The Boom Arm moves forward and backword. Then tighten Wing Nut. 3. Laptop Holder use wing nut already in place. The laptop holder turns clockwise place on then tighten with wing nut in place.
PAGE 7
The Mylaptopstandrocks is designed for Recliners - Chairs - Couches - Loveseats. The Mylaptopstandrocks has optional Desk Tray and Printer Stand. The Laptop holder top can be removed and used on any flat surface. Fully adjustable for laptops width of 19" or smaller and fits all Laptop sizes in between. Fully adjustable to each laptop size. The 24" boom arm moves to you and away from you in 2 seconds while your laptop is securely in place. Is fully adjustable to both left and right side of all furniture.