Installation Guide

16 www.mylenstairs.com
7. For metal platforms, loosely secure the platform mount brackets to the
bottom of the platform with hardware (E),(F) and (G). There are pre-drilled
holes where the mount brackets should be positioned.
8. With the mounting brackets installed on the bottom of the platform,
reposition the platform onto the column. Hold the platform in position and
fasten the mounting brackets to the wall using hardware (A) and (B). If
needed, 3/16” pilot holes can be drilled for hardware A.
9. Push the platform against the mount surface to eliminate any gaps, then
tighten all platform mounting hardware.