Installation Guide

10 www.mylenstairs.com
Adjustable Tread and Baluster Installation
1. Start installation with the top tread. Place a main baluster (3) in the hole
closest to the platform. Move the baluster up or down until the bottom of
the baluster is flush with the bottom edge of the tread.
2. Attach this baluster to the tread using the carriage bolt (G), nut (F), washer
(D) and lock washer (E).
NOTE: Main Balusters have two holes drilled near the bottom.
3. Move the top tread to the proper riser height required. If you do not know
your riser height, you may determine it by using the simple calculation
below:
a. Add number of treads and platforms = _______
b. Measure the floor to floor height in inches = ______
c. Divide 3b by 3a = ______
d. Riser height is usually between 8 ½” and 9 ½”.
Hardware
ⒹⒺⒻⒼ
ⒽⒾ
Parts
③
Tools