Installation Guide

10 www.mylenstairs.com
14. Plumb center column assembly and attach base plate to floor with
3/8”x3” lag bolts (C) and washers (B). Lead anchor shields (not supplied)
will be needed if installing into concrete.
The lag screws securing the base plate to the floor and the
platform to the wall must be installed and fully tightened
before continuing with the installation process. Failure to do
so could cause the stair to be unstable and could result in
serious injury or death.
15. Slide the column extension (10) down over the center column assembly
and tighten set screws (A).
16. Place the column cap on the top of the column extension.
Hardware
Ⓑ Ⓒ
Parts
Tools