Installation Guide

12 www.mylenstairs.com
5. Spin the next tread into position beneath the tread above. Place a main
baluster through the upper tread and into the lower tread. Move up or
down until the bottom of the baluster is flush with the bottom edge of the
lower tread.
6. Secure the baluster to the lower tread using carriage bolt (G), nut (F),
washer (D) and lock washer (E).
7. Fasten the baluster with carriage bolt (G), nut (F), washer (D) and lock
washer (E).
8. Check that the tread is level and the baluster is plumb. Tighten the 5/16”
set screws in the tread hub to lock the tread to the center column.
9. Repeat steps 6-9 with the remaining treads.