Installation Guide

16 www.mylenstairs.com
Checking the Handrail Curvature
10. Lay the handrail down and find the cut end that contacts the ground.
Use the method below to determine the orientation of the handrail.
NOTE: If the handrail orientation matches the orientation of the stairs being
installed, skip to the next step.
11. Stand the handrail up. Push a cut end towards the center of the coil
enough to clear the adjacent rail. Pull this cut end through the coil to
the other side. The other cut end must be pulled away from the center
of the coil and pushed over the adjacent rail.
Hardware
Parts
⑪
Tools