Installation Guide

ManualsBrandsMyMINIGLASS ManualsDoors & WindowsWhite 5.75 in. x 5.75 in. x 3.15 in. Classic Non-Tinted End Linear Glass Block

21

Projects frames on 2 sides:

L. Using a trowel apply

approximately a 1/2" mortar

bed to the treated curb or

 ÁRRUWKHOHQJWK

of 2 blocks.

M. Without applying

PRUWDUWRWKHÀUVW

block, place an “L”

spacer at the lower

outside corner of the

block so that the cross

arm is at the bottom, between the glass block

and curb.

N. Place a “T” spacer at the other lower

corner of the block with the

cross arm up.

4M

4L

4N

P. Slip a “T” spacer between the

block and jamb so that the

cross arm is on top of

the block.

O. Slip a 16" long piece of

trimmed expansion strip

between the block and

jamb, and push the block

ÀUPO\LQWRSODFH

4O

4P

Q. Apply 3/8" to 1/2"

of mortar to the

vertical edge of the

second block that

will contact the

preceding block.

R. Place the block

using a “T” spacer

on the bottom and

“REGULAR” spacer at

the top with the cross

arm between the two

blocks. Push the blocks together.

4Q

4R