User's Manual

MIDI 2
Bluetooth Speaker
USER MANUAL
01
Warnings
To ensure proper and trouble‐free operation, please carefully read the user manual.
For the first time user, a full charge is recommended.
∙Please use and store this product at room temperature.
∙Do not expose this product to rain, fire, high temperature, direct sunlight conditions.
Do not use organic solvents or other chemicals to clean this product.
∙Do not throw or drop this product to avoid damages.
Do not allow small particles to get into this product
Please adjust volumes of the speaker accordin gly to avoid temporary or permanent hearing loss.
∙Do not disassemble or modify this product. The warranty will be voided
∙Only charge with the rated voltage charger.
Supervise the use of this product with children.
02 Packing Content
MIDI 2 Speaker *1
USB Type‐C Charging Cable *1
3.5MM Au dio cable *1
Lanyard *1
User manual *1
03 Buttons function
LED Indicator
Power On: Blue LED blinking, awaiting Bluetooth connection
Blue LED On: Bluetooth connected
Max/Min Vol:Blue LED quick blinking
Charging indicator
:
Red LED is on when charging,
Red LEDis OFF once fully charged
Volume up:
Press and hold for next song
Power Key:
Press and hold 2secondsfor power on
Playing music:
Press the play/pause
System reset:
Long press th e powerbutton for 8 seconds
Mode shift:
Quick double press: Bluetooth mode
Micro SD card play: Aux‐In, play(loops)
(Insert Micro SD card + connect Aux‐In cable)
Accept call key:
press to accept/end, press and hold to reject
Volume down;
Press and hold for previous song
Bluetooth disconnects
Long Press power button and "M" at the same time can disconnect current device, and MIDI 2 goes to discoverable status
Short press " power key"reconnects to the last Bluetooth device
04 Ports function
Four levels power
indicator lights
Aux In
Connect Audio cable
Voiceprompt and
Aux mode automatically selected
Charging po rt
Connect DC 5V‐1A or above adapter
or use PC USB port for charging
Date access
Insert Micro SD card when power off, use data cable for conn ecting
to PC.Press and hold "Power Key"enter SD Card mode,can copy music files onto or from Micro SD card.
Micro SD play
InsertMicroSDcardwithpower
On. Status will voice prompt
"ding d ong" ready f or playing
songs from Micro SD card
05 Bluetooth connection
1. Power on
Long Press and hold "power key" 2seconds, with
voice prompt “Bluetooth”
LED blinking, awai ting conn ection.
2. Bluetooth connect
Go to device's Bluetooth, find and connect the
pairing name “My MIDI 2” With a voice" ding, dong" and
the B lue LED on .
Reconnect MIDI 2 automatically once power on and open the device's
Bluetooth function
Other tips
If need to connect to another Bluetooth device, press and
hold "+ ‐" at the same time disconnect current device.
MIDI 2 goes into BT connection status.