Operating Instruction

EDGE FCR 3 Operating Instruction

Page 12 of 64 Release Rev. C, 2019-09-10

1.7 General Safety Regulations

CAUTION

Devices on which moisture has developed because of temperature

changes must not be used unless they have been completely dried.

CAUTION

To avoid influences from the mains supply, connect the EDGE FCR 3 and

associated electronic to a different supply line compere to equipment like

e.g. converters, servo drives, motors.

CAUTION

Assembly, extension, modification or repair shall be carried out only by

MYNXG Product GmbH or by experts whose are authorized by MYNXG

Product GmbH. Violation of this prescription will result in loss of

warranty.

MYNXG Product GmbH cannot be held liable for any damages resulting

from the use of accessories or consumables, which are not provided or

approved by the manufacturer.

1.8 Certification / Compliance

The MYNXG EDGE FCR 3 is CE certified. CE marking is a certification mark that indicates

conformity with standards for products sold within the European Union (EU) and more

specific with:

▪ Article 3.1 (a) Health

▪ Article 3.1 (a) Safety

▪ Article 3.1 (b) EMC

▪ Article 3.2 Radio

The CE marking is also found on products sold outside the EU that are manufactured in, or

designed to be sold in, the EU. The CE Mark does not apply to products sold in the U.S. For

the certification report please contact MYNXG Product GmbH.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may

cause undesired operation.