Operating Instruction

EDGE FCR 3 Operating Instruction
Rev. C, 2019-09-10 Release Page 17 of 64
© MYNXG Product GmbH, 2019. All rights reserved
2.4 Industrial Usage
The MYNXG EDGE FCR 3 Gateway shall be installed with a minimum distance of 250cm
between ground floor and lowest edge of the housing by using stands as shown in Figure 2 or
a DIN-rail fixture as shown in Figure 3,. Alternatively, it can be installed inside an electrical
switching cabinet (not made of metal to avoid Faraday cage shielding effects).
IMPORTANT NOTICE
Shall the device be installed inside a metallic cabinet; external antennas
are required for communication (not included).
Figure 2: Desk placement of the MYNXG EDGE FCR 3
Figure 3: DIN Rail implementation at the MYNXG EDGE FCR 3.