Operating Instruction

EDGE FCR 3 Operating Instruction
Rev. C, 2019-09-10 Release Page 33 of 64
© MYNXG Product GmbH, 2019. All rights reserved
Table 1: Push-in spring connector characteristics
Characteristic
Value
Pitch
2.5 mm
Rated surge voltage (III / 2)
2.5 KV
Rated voltage (III / 2)
160 V
Nominal current IN
6A
Conductor cross section AWG min.
26
Conductor cross section AWG max.
20
Installing the cables at the push-in spring connector:
1. Strip cable to a length of 6mm. Please use ferrules without plastic sleeves only.
2. Push the cable gently into the push-in spring socket (Figure 23).
Figure 23: Inserting cable into push-in spring socket