Operating Instructions

SENSE MCE IBC Operating Instruction

Rev. D, 2020-12-15 Release Page 21 of 46

2.7 EMC and ESD concept

The MYNXG Sense MCE IBC is designed to be compliant with the EU and North America

regulations when installed per MYNXG Sense MCE IBC instructions.

The following components are shielded by itself:

▪ The LTE / 3G Modem is shielded, fully type approved and certified.

▪ The WI-FI module is shielded, fully type approved and certified.

▪ The Sub-1GHz Short Radio Device (SRD) is shielded and fully certified.

▪ The device is in line with the EMC Immunity and EMC Emission.

Furthermore, the PCB board design is done per the following principles:

▪ On Board EMC and ESD protection components per interface.

▪ All boards are in line with EMC Immunity Class B EN 61000-6-2.

▪ All boards are in line with Emission Class A EN 61000-6-3.

▪ All boards and all components are REACH

and RoHS

compliant with the respective

EU regulations.

The Sense MCE IBC industrial is designed for indoor or outdoor applications and should be

placed with a minimum distance of 50cm for a good radio performance.

Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) is a European Union regulation

dating from 18 December 2006. REACH addresses the production and use of chemical substances, and their

potential impacts on both human health and the environment.

The Restriction of Hazardous Substances Directive 2002/95/EC, (RoHS 1), short for Directive on the restriction

of the use of certain hazardous substances in electrical and electronic equipment. This directive restricts (with

exceptions) the use of six hazardous materials in the manufacture of various types of electronic and electrical

equipment.