Operating Instructions

SENSE MCE IBC Operating Instruction

Page 26 of 46 Release Rev. D, 2020-12-15

3.2 Placing the Sense MCE IBC

Rating the cellular radio network and Wi-Fi quality prior placing the Sense MCE IBC is

recommended to avoid bad signal qualities and transmission issues. Appropriate test

software for mobile devices like shown in Figure 6 can be found in the internet.

Figure 6: Wi-Fi Analyzer App

3.3 Installation Instructions

Figure 7 shows the principle of the installation of the Sense MCE IBC and the connected piezo

sensor. The piezo disc is glued directly onto the bottom side of the IBC. For a good functioning

of the measuring method a high quality of the bonding is crucial to ensure, on one hand a good

measurement and on the other hand a long stability and durability of the bonding.

A possible placement of the Sense MCE IBC is on the top side of the IBC, via suitable adhesive

materials. The Sense MCE IBC and the piezo sensor are connected with a cable of suitable

length. The cable is shielded coaxial to reduce potential electromagnetic interferences.

Figure 7: Principle of installation of Sense MCE IBC and connected piezo disc on IBC.